Installation guide

Installing the hardware Page 37 of 206
Meridian Companion Installation and Maintenance Guide
1. Mount the antenna using four screws.
2. To prevent undue stress on the coaxial cable, secure it to the mounting
surface.
3. Connect the antenna to the appropriate Base Station radio.
Note: The coaxial cable length must not exceed 10 m.
Installing an indoor omnidirectional external antenna
• Use the bracket supplied to mount the antenna on a wall or ceiling.
Note: Use of a bracket other than the one supplied may not provide the
necessary clearance between the floor or wall and the antenna.
• Install the bracket so that the external antenna is vertical. The
recommended mounting height on a wall is halfway between the floor
and the ceiling.