Installation guide

Page 38 of 206 Installing the hardware
553-3601-220 Standard 4.00 November 1998
Figure 2: Installing an indoor omnidirectional external antenna
1. Insert the antenna in the bracket so that the antenna is vertical.
2. Mount the bracket to the wall or ceiling using two screws.
3. To prevent undue cable stress on the coaxial cable, secure it to the
mounting surface with a clamp.
4. Connect the external antenna to the appropriate Base Station radio.
Note: The length of the coaxial cable must not exceed 10 m.
30 mm
Ceiling mount
installation
Wall mount
installation
30 mm
cable
clamp
cable
clamp
coaxial
cable
coaxial
cable