Installation guide

Installing the hardware Page 67 of 206
Meridian Companion Installation and Maintenance Guide
Figure 25 : P2 plug location
5. Fasten the ROM card securely to the standoffs.
6. Install the CMCC on the IPE Module. The CMCC must be located to the
left of any CMRC, CMLC or CMBC.
7. Connect the J1 plug of the last faceplate cable to the CMCC and verify
appropriate card LED behavior, as described in “Normal LED behavior
upon installation” on page 60.
Figure 26 illustrates how the system looks after you have installed cards and
interboard faceplate cable harnesses.
front
faceplate
LEDs
backplane connectors
J2
P2 connector
CMCC component side