Installation guide

Programming the Meridian Companion system Page 77 of 206
Meridian Companion Installation and Maintenance Guide
9. Press CHANGE to search through the list of available languages. The last
value displayed is automatically set. (If this is the working language, the
change takes place immediately.)
10. To exit, press ® .
Adjusting the contrast
If you find the Administration Terminal’s display difficult to read, you can
adjust the contrast.
Note: This feature will not work while you are in a Configuration,
Maintenance, or Administration session.
1. Press ƒ•‡ . The display shows Contrast level followed
by the current contrast level expressed as a digit.
2. Press a dialpad button between 1 and 9 to select a new contrast level, or
press DOWN
or UP .
3. Press
OK
or ® to select the contrast level you prefer.
Entering a Configuration programming session
1. Press ƒ••‚ .
2. Enter the Installer password. The default password is ‚‚‚‚ (see
“Changing passwords” on page 92).
If the password is correct, the display shows A. Configuration .
If the password is incorrect, the display shows Password: . Press RETRY
and enter the password again.
By using the arrow keys, you can select a programming category and find the
appropriate submenus for items you want to program.
Entering an Administration session
1. Press ƒ••· . The display shows Pa s s w o rd : .