Installation guide

5-14 Troubleshooting and maintenance
Meridian Mail Card Option Release 9.0
iii. For each “Out of Service” channel, press and enter
the channel number.
h. Restart Meridian Mail and repeat steps 3a through 3d to verify any
new cards you’ve installed.
4 Replace the DVP Card in slot MM2.
5 Replace the DVP Card in slot 9.
6 Replace the 68k Card.
7 Replace the Meridian 1 CPU/Conf Pack. (Refer to Meridian 1
Option 11—Installation Guide.)
System event and error reports (SEERs)
System event and error reports contain information about every system event
and error that occurs on the Meridian Mail system. To configure Meridian
Mail to print SEERs as they occur, refer to page 1-21.
To view the SEERs for a given period:
1
From the Main Menu on the System Administrator’s terminal, choose “5
System Status and Maintenance”→ “5 System Event and Error Re-
ports”.
2 On the System Event and Error Reports form, enter the appropriate
dates and times in
Report Period Start and Report Period End.
3 Press .
The reports provide you with a brief description of the system event or error
and when it occurred. For a more detailed description consult Meridian
Mail—System Event and Error Reports.
Spares planning
Table 5-1 lists the field-replaceable components of the Meridian Mail card
option, the mean time between failures (MTBF), the predicted failures per
million hours, and the number of spares of each item your location should
stock, should you decide to stock spares.