Installation guide

7-1
Installation and Maintenance Standard 3.0 March 1994
Chapter 7Meridian-1
Figure 7-0
Title with number at end 7-0
Table 7-0
Title with number at end 7-0
System expansion
This chapter describes the procedures to follow when adding new hardware
locations or modifying the existing hardware locations, expanding the sys-
tem’s disk storage, adding new languages, or enabling optional features.
What you need
• The Meridian Mail software tape, NTAK72xE. (Refer to Table 2-1 on
page 2-2 for the exact part number).
• The new keycode for your system. (Refer to Chapter 2.)
System expansion is enabled through a security keycode purchased from your
Meridian 1 representative. There is no need to purchase any new software.
When you wish to expand an existing system, you receive a pair of new labels
from your Meridian 1 representative containing the keycode you need. Stick
these labels on top of the old keycode labels, one on the tape and the other
inside the door of the Option 11 cabinet.
Note: Do not place the label on the metal plate on the back of the tape.
This area must be kept clear to allow for the discharge of electrostatic
buildup in the tape.
If you order your new features along with the latest software release, the label
on the new software tape will contain the keycode you need.
Precautions
This single keycode enables each of the system modification procedures you
have to perform. It is important, however, that you perform the procedures in
the following order: