Installation guide

11-1
Installation and Maintenance Standard 3.0 March 1994
Chapter 11
Figure 11-0
Title with number at end 11-0
Table 11-0
Title with number at end 11-0
Terminal configuration
The procedures on the following pages describe how to set up the video dis-
play terminals supported by Northern Telecom.
• NT220 terminals page 11-1
• VT220, VT320, and VT420 terminals page 11-3
• HP700/22 terminals page 11-8
• HP700/32 terminals page 11-9
If the terminal you are configuring is different from these, use the most sim-
ilar settings available and follow the instructions in the manual that came with
the terminal.
NT220 terminals
Table 11-1 on page 11-3 contains the set-up values for NT220 terminals. The
set-up procedure is as follows:
1
Turn on the terminal.
2 Press to enter set-up mode.
The current set-up values are displayed on a series of screens.
CAUTION
Potential data loss
Set-up mode can be entered at any time, but it is rec-
ommended that you do not do so while information is
being printed on the screen.