Installation guide

Hardware installation 1-3
Installation and Maintenance Standard 3.0 March 1994
The following are optional:
• External tape drive kit and SCSI cable, North America (NTAK30CA)
• External tape drive kit and SCSI cable, United Kingdom (NTAK30BA)
• External tape drive kit and SCSI cable, European Mainland (NTAK30AA)
Note: These tape drive kits each come with a power cord appropriate to
their location.
• Tape Drive Wall Mounting Kit (NTAK39AA)
• 3M brand DC6250 tapes (A0368760) for system backups
• Northern Telecom Personal Printer (C2501287)
• RSM Breakout Assembly (NTAK18AA)
• RSM Breakout Assembly, with enhanced EMI protection (NTAK18BA)
• Hospitality Voice Services (HVS) Hardware Kit, including RSM Break-
out Assembly (NTAK35AA)
• Networking Hardware Kit, including RSM Breakout Assembly
(NTAK40AA)
The HVS and Networking Hardware Kits each contain the RSM Breakout
Assembly which fits under the Meridian 1 card cage and plugs into the right-
most 25-pair connector, J10.
Precautions
If you are installing an HVS or Networking system, you must install the RSM
Breakout Assembly first.
You can install the Meridian Mail hardware while the Meridian 1 PBX is run-
ning, but you must ensure that the switch on the 68k Card is in the off (down)
position. Failing to do so can result in damage to the components or injury to
yourself.
DANGER
Shock hazard
Before removing any cards, ensure that the power
switch on the 68k Card is in the off (down) position.