Installation guide

1-6 Hardware installation
Meridian Mail Card Option Release 9.0
5 Fit the RSM Breakout Assembly over the plastic extrusion that holds the
right end of the cable restraining bar in place, plug it into the rightmost
25-pair connector, and secure it in place with the screw provided.
6 Run the MDF cable down through the Meridian 1 cabinet as shown in
Figure 1-3.
7 Replace the cable restraining bar.
You can now install or reinstall the remaining Meridian Mail cards and turn
on the Meridian Mail system.
Figure 1-3
The RSM Breakout Assembly 1-3
You can work with the RSM cable while the RSM Breakout Assembly is in-
stalled and Meridian Mail is on. For information on connecting peripheral de-
vices to the RSM cable, refer to “Hospitality systems” (Chapter 8) or
“Networked systems” (Chapter 9).
SDI Port
to System
Administrator’s 
terminal
MDF cable
to BIX
or BIX panel
RSM Breakout Assembly
installed and secured
CARD-031
Normal/Bypass switch
Ferrite ring