Installation guide

Hardware installation 1-19
Installation and Maintenance Standard 3.0 March 1994
Table 1-2
LA75 Plus Companion printer default settings 1-2
For NT220 terminals , connect the printer to the port labelled “Auxiliary”
using an NT0M96DC/DD cable. Some NT220 terminals require an In-
mac 328 adaptor (A0351509).
For HP700/22 terminals , connect the printer to the port labelled “Print-
er” using an A0369499 cable.
For HP700/32 terminals , connect the printer to the port labelled “Port
2” using an A0376171 cable.
Feature
Number
Name Value
Number
Name
Generic 1 Protocol at Power-up 3 Port Dependent
Generic 2 Form length 9 11 inches (A)
Generic 3 Vertical pitch 4 6 lines per inch
Generic 4 Automatic advance 1 Selected
Generic 5 Print quality control 1 Software control
Generic 6 Port selection 1 Serial port
Generic 7 Baud rate 7 9600
Generic 8 Data bits and parity 7 8-none
Generic 9 Buffer control 1 XON/XOFF
Generic 10 Error beep 1 One beep
Generic 11 Typestyle 1 Internal
Generic 12 Input buffer size 1 8K
Generic 13 Disconnect on fault 1 Not selected
DEC 1 Horizontal pitch 7 10 Char. per in. (80 Col)
DEC 2 GO character pitch 1 US ASCII
DEC 3 User pref. char. set 1 DEC Supplemental
DEC 4 Printer ID 4 Conf. Level 2 (LA75 Plus)
DEC 5 Text mode right margin 2 Wrap