Installation guide

2-1
Installation and Maintenance Standard 3.0 March 1994
Chapter 2
Figure 2-0
Title with number at end 2-0
Table 2-0
Title with number at end 2-0
System installation and modification
This chapter describes how to use the System Installation and Modification
Utility that comes on the Meridian Mail software tape. This utility is used to
install software on new systems, modify the software on existing systems, re-
store systems from a backup tape, and perform routine system maintenance.
The software tape
The software tape you receive depends on the languages you order, as seen in
Table 2-1 on page 2-2. If the languages you order are not contained on a sin-
gle tape, you will receive more than one tape. If, for instance, you order Ger-
man and Russian, you will receive the North American tape and the Europe
2 tape.
Keycodes and labels
Many of the functions available through the System Installation and Modifi-
cation Utility require you to enter a special access code. This keycode is pro-
vided by your Meridian 1 representative and unlocks the capabilities you’ve
purchased for your system, including:
• The amount of disk storage the system can use
• The number of channels and their attributes
• The number of languages
• Special Meridian Mail features, such as Networking and Hospitality
Voice Services
The keycode for a system is printed on the label on the box containing the Me-
ridian Mail software tape. Figure 2-1 is an example of a typical label for a
Card Option system. You should also receive a second, duplicate label. Affix