Installation guide

4-4 Basic system procedures
Meridian Mail Card Option Release 9.0
To enable the console and the AML data ports
1
Log on to the Meridian 1 PBX. (Refer to page 4-1.)
2 At the > prompt, enter the following:
LD 48
ENL ESDI 8 to enable the console’s data port
ACMS 9 to establish the link on port 9
3 Enter ****
To disable the console and the AML data ports
1
Log on to the Meridian 1 PBX. (Refer to page 4-1.)
2 At the > prompt, enter the following:
LD 48
DIS ESDI 8 to disable the console’s data port
DIS ESDI 9 to disable the link on port 9
3 At the prompt, enter Y to confirm the disable.
4 Enter ****
For Release 18 systems and later
Use these procedures if the software running on your Meridian 1 switch is Re-
lease 18 or later.
To enable the console and the AML data ports
1
Log on to the Meridian 1 PBX. (Refer to page 4-1.)
2 At the > prompt, enter the following:
LD 48
ENL AML 8 LYR2 to enable the console’s data port
ENL AML ACMS 9 LYR2 to establish the link on port 9
3 Enter ****