Installation guide

Basic system procedures 4-5
Installation and Maintenance Standard 3.0 March 1994
To disable the console and the AML data ports
1
Log on to the Meridian 1 PBX. (Refer to page 4-1.)
2 At the > prompt, enter the following:
LD 48
DIS AML 8 LYR2 to disable the console’s data port
DIS AML 9 LYR2 to disable the link on port 9
3 At the prompt, enter Y to confirm the disable.
4 Enter ****
Stopping Meridian Mail
Before turning the power off to the Meridian Mail cards, you should courtesy
down the system. This allows anyone using Meridian Mail to finish their ses-
sion before the system is brought down. During this time, no further users are
allowed to log on to Meridian Mail, and calls are directed to the Meridian
Mail attendant.
Courtesying down the system
1 Log on to Meridian Mail at the System Administrator’s terminal.
2 From the Main Menu, choose
“5 System Status and Maintenance.”→“1 System Status.”
3 Press .
4 At the prompt, Do you want to courtesy down the system?,
use or to choose “Yes,” and press
.
The display charts the progress of the courtesy down. Hardware loca-
tions are put out of service as users finish their sessions. System Status
displays “CourtesyDown” when the process is complete.
Turning Meridian Mail off
Turning off Meridian Mail while the Meridian 1 PBX is running can cause a sys-
tem error. Perform the following procedure whenever you have to turn off Merid-
ian Mail for software upgrades, system restores, or hardware maintenance.
1
Disable the data ports for the console and the AML. (Refer to page 4-3.)