User`s guide

6-114 Setting up Meridian Mail security
Extension dialing (mailbox thru-dial)
Standard 1.0 System Administration Guide January 1998
Controlling access
within the switch
To control access of the Thru-dial feature within the Meridian 1
system, use the following procedure. This method allows you to
restrict the Thru-dial feature through the virtual agent.
Note 1: To restrict all access to the outside world through Thru-
dial, be sure to restrict both your Least Cost Routing access
code and your direct access code to each trunk group in the
Meridian 1.
Note 2: Be sure to block access to your Special Prefix (SPRE)
code as well.
The restrictions you impose through the virtual agent apply to
Thru-dial functions accessed both through the voice menus
feature and at the mailbox level.
Step Action
1 Assign the appropriate Network Class of Service (NCOS).
For more information, see “Network Class of Service—Facility
Restriction Level” on page 6-55.
2 Assign the appropriate Trunk Group Access Restrictions
(TGAR).
For more information, see “Trunk Group Access Restrictions”
on page 6-11.
3 Assign the appropriate Class of Service (COS).
For more information, see “Class of Service” on page 6-13.