User`s guide

8-6 Local voice users
Adding a local voice user
Standard 1.0 System Administration Guide January 1998
Adding a local voice user
Introduction
Local voice users are added in the Add a Local Voice User
screen. There are a number of things you must do in this
screen in order to define a local voice user.
Procedure
This is a high-level procedure that lists the steps involved in
adding a local voice user. Detailed step-by-step procedures
are provided on the following pages.
Step Action Page
1 Do you want to add a number of users to an NMS
location?
• If yes, set the default administration context.
• If no, go to step 2.
8-8
2 Access the Add Local Voice User screen. 8-10
3 Enter user information such as the user’s first and
last names.
8-15
4 Assign the user to a class of service. 8-20
5 Specify the following DNs for the user if necessary:
• up to seven additional extension DNs
• a revert DN
• the MWI DN (if different from the mailbox
number)
8-24
6 Record a personal verification for the user if
necessary.
Note:
Most users record their own verifications.
8-34