User`s guide

Local voice users 8-43
Setting other local voice user characteristics
Standard 1.0 System Administration Guide January 1998
Procedure
To set the remaining local voice user characteristics, follow
these steps.
Starting Point:
The Add Local Voice User screen
Step Action
1 Do you want to prohibit external callers from using name dialing
to call this user?
• If yes, set the Name Dialable by External Callers field to No.
• If no, leave the Name Dialable by External Callers field set
to Yes.
2 If Hospitality is installed, are you adding a mailbox for a guest?
• If yes, leave the Hospitality User Class as “Guest.”
• If no, set the Hospitality User Class field to “Staff.”
3 If VMUIF is installed, change the volume level if necessary.
4 If more than one language is installed on the system, specify
the user’s preferred language.
5 Do you want to save the local voice user as currently defined?
• If yes, press the [Save] softkey.
Note:
If the entered DN is already in use by another Local
Voice User or Remote Voice User, a warning message will
appear. You can either modify the DN or press the [Save]
softkey to save the DN for the user who originally had the DN.
• If no, make any necessary changes and then press [Save],
or press [Cancel] if you do not want to add this user.