User`s guide

Local voice users 8-95
Monitoring mailbox logins for suspected hacker activity
Standard 1.0 System Administration Guide January 1998
Immediate
notification of login
If you (or a support person) want to be notified immediately
of an occurrence of these SEERs, you can set up a SEER
message trigger mailbox and then enable remote notification
for that mailbox. To do this you must do the following.
1. Enable mailbox monitoring as described above.
2. Set up a message trigger for SEER 2262 or 5662, or
both, so that an urgent SEER message is deposited in a
designated mailbox when the mailbox is logged into.
See “Using SEER triggering” on page 29-35.
3. Set up remote notification for the designated mailbox so
that you (or a support person) will be paged or phoned as
soon as the urgent message is deposited.
Refer to the Outcalling Application Guide
(NTP 555-7001-320) for more information.
6 Select Local Voice User and press the [View/Modify] softkey.
Result:
You are prompted for a mailbox number.
7 Enter the user’s mailbox number.
8 Go to the Monitor Mailbox during Monitoring Period field and
set it to Yes.
9 Press the [Save] softkey.
Result:
Whenever the mailbox is logged into during the
monitoring period, SEER 2262 for MMUI users or SEER 5662
for VMUIF users will be generated.
Step Action