User`s guide

Remote voice users 9-25

Adding remote voice users using RVU Propagation via Bulk Provisioning

Standard 1.0 System Administration Guide January 1998

Application 2: Seeding

temporary users

RVU Propagation via Bulk provisioning

You can use bulk provisioning to initially add temporary remote

voice users in a batch as the network is set up. In this way, all

the users at a remote site could be made available at one time.

RVU Propagation via Enterprise Networking

Once users have been added using bulk provisioning, you can

use RVU Propagation via Enterprise Networking to maintain

the database of temporary users.

This means that any additional temporary remote voice users

will automatically be added on an as-needed basis. Over time,

the less frequently used temporary remote voice users will be

deleted during the nightly audit to lessen the system load. Only

regularly accessed temporary users will be kept on the system.

Application 3:

Selective seeding of

temporary users

In Application 2, you use RVU Propagation via Bulk

Provisioning to seed a large number of temporary remote voice

users.

If you want to add a selective (smaller) subset of remote voice

users to your system, you can do the following.

1. Compose a voice message to the users you want to add as

remote voice users to your system.

2. Tag the message for acknowledgment.

3. Send the message.

When the read message acknowledgment comes back, the

users are added as temporary remote voice users.