User`s guide

Distribution lists 11-13
Adding a system distribution list
Standard 1.0 System Administration Guide January 1998
List Title
Description
This is the title of the distribution list. It can be up
to 41 characters in length. Do not use “?”, “+”, or
“__”
(underscore) which are wildcard characters.
The title can be used to address the distribution list
by name when you are composing and sending a
message to mailboxes on the distribution list.
Default
There is no default value.
Valid range
There is no default range.
List Title Recorded (Voice)
Description
This read-only field indicates whether a voice
recording of the list title has been made. It is a
good idea to record a title for each distribution list.
This helps you to identify the list after you have
entered its number when composing a message.
Choose a name that uniquely identifies this list.
This field changes only when you use the [Voice]
softkey to record or delete a list title.
Default
No
Valid range
There is no default range.
Mailbox Numbers
Description
In these fields, you type the mailbox numbers of
the users you want to include on the distribution
list. Mailbox numbers can be up to 18 digits in
length.
If Meridian Networking is installed and enabled,
you can enter up to 28 characters in each of these
fields. You can include up to 120 mailbox numbers
in a system distribution list.
To add more mailbox fields, use the [More Fields]
softkey.
Default
These fields are blank.
Valid range
from 10 to 999999999999999999 (there are 18 9s)
Note: These must be valid local and remote voice
users.