User`s guide

Navigating through system administration 2-41
Error messages
Standard 1.0 System Administration Guide January 1998
Error messages
Introduction
The system displays error messages, both general and screen-
specific, on the line above the softkey display.
These messages remain on the screen until the next user input or
until another error message appears.
Purpose
These messages provide feedback on administration actions.
They should not be confused with System Event and Error
Report (SEER) messages.
SEER messages
If SEER printing is disabled, SEER messages will print out on
the administration screen.
Examples of error
messages
The following are two examples of error messages:
• “The key entered is not valid at this time.”
• “Enter a number in the range of 1 to 6.”