22 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 Device description ●Bluetooth 5.2 Audio and Data Module ●UART/USB/GPIO Command ●11.8mmx18mmx3.2mm form Factor ●Simultaneous Low Energy/Classic Bluetooth ●Connect to Apps (iOS/Android/etc.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 Contents General Specifications ............................................................................................................... 3 Footprint ..................................................................................................................................... 4 Pinout ..............
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 Footprint Page: 4 Copyright IOT747 IOT747, 122 Ross Street, Cambridge, CB1 3BU, United Kingdom Check www.iot747.com for updates. Email: info@iot747.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.
IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 IDC7 Bluetooth Module 122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com Model: IDC747 Hardware Design Guidelines The IDC747 is typically powered by a fixed 3V supply where the module is included in a larger portable device and charging of the battery is supported by alternative functionality outside the remit of the IDC747. This is the Fixed Voltage Supply Configuration.
IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 IDC7 Bluetooth Module 122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com Model: IDC747 Battery Voltage Supply Configuration In a battery sourced application VBAT and VBAT_SENSE are connected to the battery source, VDD_PADS is driven from a regulated supply external to the module, VCHG and VCHG_SENSE are connected to the charging input source as per the figure below.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 SYS_CTRL is typically connected to an ON/OFF push button. If power is present from the battery and/or charger, and software has placed the device in the Power OFF mode, a long button press (SYS_CTRL held high for 20 ms) boots the device. Once the module is booted, SYS_CTRL acts like a standard PIO.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 IDC7 Bluetooth Module Model: IDC747 GPIOs and UART The module is controlled by GPIOs. This can be configured. If GPIO control is not used, these GPIOs should be left floating. The UART by default does not use RTS/CTS flow control. If the users do not expect to use it, these lines should be left floating.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 Audio Circuit Connecting Microphones Stereo Microphone example schematic. Mono Microphone example schematic. The Left Channel is used for Mono Operation. You can leave the right channel unconnected.
2 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 Connecting Speakers The analogue output is not AC coupled. The analogue output circuit comprises a DAC, a buffer with gain-setting, a low-pass filter and a class AB output stage amplifier.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 An example USB supply configuration is shown below. The Developer board uses an external Amplifier for audio application demonstration purposes. For superior audio performance always follow the design and layout guidelines provided by the amplifier manufacturer.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 An example amplifier circuit suitable for connecting external headphones. When connecting to external devices such as laptops in a “Line In” configuration there is a possibility that the sleeve of the audio cable can carry noise derived from the laptop.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 Example of a filter circuit or a Ferrite bead: Some amplifiers do not support “capless” operation and require ac coupling on the input and output of the amplifier.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 The module can be used to drive amplifiers in a single ended format. Simply terminate the +ve differential outputs directly to the audio ground. An example of a single ended connection is shown below. Page: 16 Copyright IOT747 IOT747, 122 Ross Street, Cambridge, CB1 3BU, United Kingdom Check www.iot747.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 Solder Reflow Profile The solder profile is described below. Zone A: Preheat: This raises the temperature at a controlled rate, typically 0.5 - 2C/s. This will preheat the component to 120°C to 150°C to distribute the heat uniformly to the PCB.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 Regulatory Certifications The module is delivered with FCC, CE and Bluetooth SIG certifications. This allows to integrate the module in an end product without the need to obtain subsequent and separate approvals from these regulatory agencies.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 IDC7 Bluetooth Module Model: IDC747 R&TTE Directive requires a manufacturer to establish technical documentation. It must be kept by the manufacturer or his authorised representative in the EU for at least 10 years after the last product has been manufactured.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 Ordering Information Order Number IDC747-1 IDC747-1-DK Description Class1 Bluetooth 5.2 Module IDC707-1 Development board Modules are shipped Flashed with the latest AudioAgent firmware production build.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 Packaging Modules are shipped in a Tape and Reel. The package and inside tape and reel dimensions are shown below: Page: 22 Copyright IOT747 IOT747, 122 Ross Street, Cambridge, CB1 3BU, United Kingdom Check www.iot747.com for updates. Email: info@iot747.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 General Notes IOT747 products are not authorised for use in life-support or safety-critical applications. Use in such applications is done at the sole discretion of the customer. IOT747 will not warrant the use of its devices in such applications.
122 Ross Street, CB13BU Cambridge, United Kingdom www.iot747.com IDC7 Bluetooth Module Model: IDC747 IDC747 Module Product Information Data Sheet Ref: IDC747-DTS-V003 Latest Update: July 20, 2021 Change Log 6/1/2021: Draft Version 9/4/2021: Minor Corrections / Typos – Added information on front page 20/7/2021: Clarified Supply configurations. Added Test Points for Fixed Supply 21/7/2021: Simplified Supply configuration – Removed detailed Power States. Deleted references to SPI as only used in IDC707.