Server User Manual

2-30 Removal and Replacement Procedures
Riser Board and Brace
To remove the riser board and brace:
1. Perform the preparation procedures. See page 2-4.
2. Remove the server cover. See page 2-7.
3. Remove all expansion boards.
4. Loosen the two captive screws securing the riser board and brace 1.
5. Lift the riser board and brace out of the unit 2.
1
2
Figure 2-26. Removing the riser board and brace
Reverse steps 1 through 5 to replace the riser board and brace.