User`s guide

Getting Started 6
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc
Projector and lens cap
10-foot power cable
RS232 (serial) to DVI upgrade adapter
Eight signal cables:
n One VGA signal cable for use with computers, portables, and
some handheld products
n One digital DVI to DVI signal cable for use with compatible
digital sources
n S-video cable (for connecting digital devices such as a DVD
player, camcorder, etc.)
n Composite video cable (for connecting to a videocassette
recorder)
n Audio cables (2; one cable has mini connectors on both ends
and is used to connect the Multimedia Adapter to a
computer; the other cable has two RCA connectors on one
end and a mini connector on the other end and is used to
connect a videocassette recorder to a computer)
n Remote control Y-cable
8-pin to USB/RS232 Y-cable used to connect the Multimedia
Adapter to a computer for use with the remote control. When
using the Y-cable, do not connect both the USB and RS232
connectors to a computer at the same time. The USB
connector is the preferred connector.
NOTE: The remote control Page Up and Page Down
functions require an additional driver when used with the
RS232 connector. This driver can be found on the CD-ROM
that came with your projector.
n Component HDTV to VGA cable (optional use)
Compaq Multimedia Adapter (optional use)
Remote control, including two AAA batteries (optional use)
Carrying case
CD-ROM containing the Compaq Presentation utility program,
Compaq Projector Display Assistant utility, RS232 driver, and
the User’s Guide
Two Quick Setup cards and the Agency Regulatory Notices
booklet