Specifications

x Compaq 3000 Series UPS Operation and Reference Guide
Compaq Confidential – Need to Know Required
Writer: Melinda Hill Puglisi Project: Compaq 3000 Series UPS Operation and Reference Guide Comments:
Part Number: 341251-002 File Name: a-frnt.doc Last Saved On: 8/26/99 4:46 PM
WARNING:
The 3000 Series UPS models weigh 132 lb (60 kg) when fully
assembled. To reduce the risk of personal injury or damage to the equipment:
■
Observe local occupational health and safety requirements and guidelines
for manual material handling.
■
Obtain adequate assistance to lift and stabilize the chassis during
installation or removal.
■
Remove the battery pack to reduce the overall weight of the product by
approximately 60 lb (27 kg).
■
Adhere to the precautions and guidelines set forth in the “Rack Stability”
section to follow.
IMPORTANT:
Please refer to the
Important Safety Information
(included with the
UPS kit) before installing this product.
Rack Stability
WARNING:
To reduce the risk of personal injury or damage to the equipment,
take the following precautions:
■
The 3000 Series UPS models MUST be installed at the bottom of the rack.
If placed in the rack with existing equipment, the rack must be
re-configured to allow installation of the UPS at the bottom of the rack.
■
Do not use slides to mount the UPS in the rack.
■
Use the fixed rails supplied in the installation kit.
■
Use a minimum of two people to place the UPS on the rails.
WARNING:
Make sure that the rack containing the UPS is stable. The following
conditions must be met:
■
The leveling feet are extended to the floor.
■
The full weight of the rack rests on the leveling feet.
■
The stabilizing feet are attached to the rack, if it is a single rack
installation.
■
The racks are coupled together in multiple rack installations.
■
A rack may become unstable if more than one component is extended for
any reason. Extend only one component at a time.