Specifications

2-4
Compaq 3000 Series UPS Operation and Reference Guide
Compaq Confidential – Need to Know Required
Writer: Melinda Hill Puglisi Project: Compaq 3000 Series UPS Operation and Reference Guide Comments:
Part Number: 341251-002 File Name: c-ch2 Installation.doc Last Saved On: 8/26/99 4:47 PM
Rack Mounting the UPS
The 3000 Series UPS models must be mounted on fixed rails. Refer to the
appropriate installation card (supplied with the UPS kit) to obtain instructions.
WARNING:
The 3000 Series UPS models weigh 132 lb (60 kg). To reduce the
risk of personal injury or damage to the equipment, take the following
precautions:
■
The 3000 Series UPS models MUST be installed at the bottom of the rack.
If placed in the rack with existing equipment, the rack must be re-
configured to allow installation of the UPS at the bottom of the rack.
■
Do not use slides to mount the UPS in the rack.
■
Use the fixed rails supplied in the installation kit.
■
Use a minimum of two people to place the UPS on the rails.
WARNING:
Make sure that the rack containing the UPS is stable. The following
conditions must be met:
■
The leveling feet are extended to the floor.
■
The full weight of the rack rests on the leveling feet.
■
The stabilizing feet are attached to the rack, if it is a single rack
installation.
■
The racks are coupled together in multiple rack installations.
■
A rack may become unstable if more than one component is extended for
any reason. Extend only one component at a time.