Specifications

2-6
Compaq 3000 Series UPS Operation and Reference Guide
Compaq Confidential – Need to Know Required
Writer: Melinda Hill Puglisi Project: Compaq 3000 Series UPS Operation and Reference Guide Comments:
Part Number: 341251-002 File Name: c-ch2 Installation.doc Last Saved On: 8/26/99 4:47 PM
Use this procedure to activate the REPO port:
1. Install a suitable switch at the required remote location.
2. Remove the connector block from the REPO port.
REMOTE
POWER OFF
Figure 2-2. Removing the connector block
3. Wire the connector block using stranded, non-shielded wire
(AWG #22 - #18, or equivalent).
4. Replace the connector block in the REPO port.
REMOTE
POWER OFF
Figure 2-3. Replacing the connector block
IMPORTANT:
The remote switch must be in the OFF (open) position to enable power to
the output receptacles.