Owner's manual
Table Of Contents
- DOCUMENTATION SURVEY
- Notice
- CONTENTS
- USING THIS GUIDE
- GETTING STARTED
- TAKING A LOOK AT THE COMPUTER
- USING THE KEYBOARD AND POINTING DEVICE
- USING BATTERY PACKS
- COMPUTER POWER AND POWER MANAGEMENT
- WORKING WITH REMOVABLE DRIVES AND DEVICE BAYS
- USING THE MOBILE 3500 EXPANSION UNIT
- CONNECTING EXTERNAL DEVICES
- USING PC CARDS
- USING AUDIO FEATURES
- UPGRADING THE COMPUTER
- MAINTENANCE AND TRAVEL GUIDELINES
- SECURITY FEATURES
- INTELLIGENT MANAGEABILITY
- DIAGNOSTICS UTILITIES
- TROUBLESHOOTING
- COMPAQ CUSTOMER SUPPORT
- REGULATORY NOTICES
- ELECTROSTATIC DISCHARGE
- SPECIFICATIONS
- INDEX
Connecting External Devices 8-7
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 4:11 PM
Part Number: 310296-002 File name: Ch08.doc
2. Close the display if not already closed.
NOTE:
Disconnect the PC Card cable and unlock the security
cable, if applicable, to prevent damage.
3. Slide the power switch on the computer, or press the power
button on the convenience base
1
.
4. Pull the docking lever fully forward to undock the computer
and M35EU
2
.
5. Slide the computer and M35EU forward from the convenience
base to remove
3
.
6. If the computer display is blank, press the
Fn+F4
hotkeys to
switch the display from the external monitor to the computer
display.