User Guide
Table Of Contents
- Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- 5.1 Serial Number
- 5.2 Disassembly Sequence Chart
- 5.3 Preparing the Computer for Disassembly
- 5.4 Computer Feet
- 5.5 Memory Expansion Board
- 5.6 Mini PCI Communications Board
- 5.7 Disk Cell RTC Battery
- 5.8 Connector Cover
- 5.9 LED Cover
- 5.10 Keyboard
- 5.11 Heat Spreader
- 5.12 Processor
- 5.13 Display
- 5.14 Palm Rest
- 5.15 Diskette Drive
- 5.16 TouchPad Components
- 5.17 Display Release Assembly
- 5.18 Charger Board
- 5.19 Speaker Assembly
- 5.20 Top Cover
- 5.21 Fan
- 5.22 System Board
- 5.23 Modem Cable
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
Removal and Replacement Procedures
Maintenance and Service Guide 5–31
5.13 Display
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the LED cover (Section 5.9).
3. Remove the keyboard (Section 5.10).
Displays
Spare Part Number Information
For use only with Evo Notebook N1005 models
15.0-inch, TFT, SXGA+
15.0-inch, TFT, XGA
14.1-inch, TFT, XGA
For use only with Presario 900 models
15.0-inch, TFT, SXGA+
15.0-inch, TFT, XGA
14.1-inch, TFT, XGA
Display Inverter Board Kit (not illustrated)
291643-001
291642-001
291641-001
286754-001
285521-001
285520-001
293348-001
272638-001.book Page 31 Thursday, July 25, 2002 4:21 PM