User guide

8 AB300A Console User Guide
Configuring the AB300A as an RS-232 Console
The following section describes how to create a terminal emulator session, how to create an
auto log on user account, and how to configure the terminal emulator session to automatically
launch when the thin client is rebooted for any reason.
NOTE: There is currently no method of saving these configuration parameters to a file that can be
retrieved at a later time. Therefore, it is imperative that all configuration parameters are recorded for
future use.
Creating a Terminal Emulator Session
To create a terminal emulator session, perform the following steps:
1. Connect the HP Compaq Thin Client T5500 unit using the supplied DB9 Serial Cable
(5184-1894) to the serial port of the HP9000 server.
2. Select Start > Programs > Connection Administrator.
3. Press the Add button.
4. Choose Terminal Emulation
5. From the HP Connection Window, run the New Terminal Emulation wizard.
6. Create a Connection Name for this session.
NOTE: Please note that the console solution supports two of the available teemCE emulations: VT 100
and HP 700-92/96.
7. If using the HP700-92/96 emulation mode, click the Emulation dropdown list to select
the HP700-92/96 emulation mode. Click the Terminal ID dropdown list to select 70092
and click Next.