. . . . . . . . . . . . . . . . . . . . . . . . . Reference Guide Compaq Armada 1100 Family of Personal Computers Reference Guide Compaq Armada 1100 Family of Personal Computers • Controls and Indicators • Maximizing Battery Life • Computer Upgrades • Diagnostics • Troubleshooting 262446-002 COVER.
. . . . . . . . . . . . . . . . . . . . . . . . . Notice The information in this guide is subject to change without notice. COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. This guide contains information protected by copyright.
Part Number: 262446-002 Writer: Lorise Fazio Saved by: Johnnie Abercrombie Saved Date: 08/26/96 1:57 PM 12:32 PM File Name: NOTI-US.
. . . . . . . . . . . . . . . . . . . . . . . . . Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
. . . . . . . . . . . . . . . . . . . . . . . . . European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
. . . . . . . . . . . . . . . . . . . . . . . . . Battery Notice ! WARNING: This computer contains an internal lithium battery-powered real-time clock circuit. There is a risk of explosion and injury if the battery is incorrectly replaced or handled improperly. Do not attempt to recharge, disassemble, immerse in water, or dispose of it in fire. Replacement should be done by a Compaq authorized service provider using the Compaq spare part for this computer.
. . . . . . . . . . . . . . . . . . . . . . . . . Contents Preface Using This Guide ........................................................................................ xv Chapter 1 Finding Information About Your Computer Printed and Online References ...................................................1-1 Ordering Backup Diskettes ........................................................1-2 Worldwide Telephone Numbers.................................................
. . . . . . . . . . . . . . . . . . . . . . . . . Using AC Power ........................................................................4-6 To connect an AC Adapter ..................................................4-6 Using Battery Power ..................................................................4-7 Reading the Battery Gauge ..................................................4-7 Resolving a Low-Battery Condition ....................................4-8 Extending Battery Pack Operating Time ..........
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 6 Upgrading the Computer Installing Software .....................................................................6-2 Adding Memory.........................................................................6-3 Chapter 7 Connecting External Equipment Device Manager Utility..............................................................7-1 Add New Hardware Icon............................................................7-2 Connecting a Printer............
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 10 Diagnostics Accessing Diagnostics ..........................................10-1 Accessing Diagnostics from Windows .............................. 10-1 Running Computer Checkup (TEST) ....................................... 10-2 Running the View System Information(Inspect Utility)........... 10-4 Chapter 11 Troubleshooting Checklist ..................................................................................
. . . . . . . . . . . . . . . . . . . . . . . . . Appendix A Specifications ......................................................................................... A-1 Appendix B POST Error Messages ..............................................................................B-1 Appendix C Connector Pin Assignments....................................................................C-1 Appendix D Power Cord Set Requirements General Requirements .............................................................
. . . . . . . . . . . . . . . . . . . . . . . . . Preface Using This Guide Purpose This guide is a supplemental reference that takes you further than Quick Setup with general information about the computer, troubleshooting and diagnostics, and technical specifications. Symbols and Conventions The following format conventions distinguish elements of the text throughout this guide: ■ Key names appear in a boldfaced type looking very much the way they appear on the keyboard.
. . . . . . . . . . . . . . . . . . . . . . . . . The following words and symbols mark special messages throughout this guide: ! WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions in the caution could result in damage to equipment or loss of information. IMPORTANT: Text set off in this manner presents clarifying information or specific instructions.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 1 Finding Information About Your Computer In this chapter you will learn about the references that come with your computer and where to find them. References are provided for you in two ways: ■ As printed materials ■ As online information accessible from the computer screen NOTE: The printed and online references that come with the computer vary by model.
. . . . . . . . . . . . . . . . . . . . . . . . . CAUTION: Most online references are available only through the Windows interface. If you delete Windows, those references will also be deleted. Therefore, Compaq recommends that you not delete Windows software. Ordering Backup Diskettes Compaq recommends that you create a backup of the software preinstalled on the computer. Or, for an additional cost, you can order backup diskettes from Compaq for all software preinstalled on this computer.
. . . . . . . . . . . . . . . . . . . . . . . . . Worldwide Telephone Numbers Locate your geographical area from the following table and use one of the telephone numbers for Compaq assistance. General Information Numbers—Product information, technical assistance, and the location of your nearest Compaq authorized dealer, reseller, or service provider. Technical Support Numbers—Hardware technical support in analyzing system configuration and diagnostic problems or troubleshooting.
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 2 Taking a Look at the Computer Your notebook computer is equipped with many components, including levers, buttons, indicators, and connectors. This chapter familiarizes you with the components on the computer and how to use them. External devices such as a printer, serial device, monitor, keyboard, and mouse can be connected to your computer to enhance its functionality.
. . . . . . . . . . . . . . . . . . . . . . . . . Front and Side Components 1 5 7 2 3 4 6 Front and Side Components Front and Side of the Computer Ref. Component Function n Handle bracket (2) Allows the handle to be attached NOTE: To attach the handle, move the tilt feet aside and rotate the concealed handle brackets toward the rear of the computer o p q Keyboard tilt feet (2) Tilt the keyboard 4 degrees Diskette drive Internal drive for 3.
. . . . . . . . . . . . . . . . . . . . . . . . . Keyboard Components 1 2 3 4 5 7 6 7 Keyboard Keyboard Components Ref Component Function n Power button o p r s Status panel Function keys F1–F12 Embedded numeric keypad Cursor keys Integrated trackball t Palm Rest (2) When pressed the first time, turns on the computer. When pressed once after the computer is on, initiates Standby (Suspend). When pressed the second time, exits Standby. See Chapter 4, “Managing Power,” for details.
. . . . . . . . . . . . . . . . . . . . . . . . . Status Panel Indicators 4 2 3 1 8 6 5 7 Status Panel Indicators Status Panel Indicators 2-4 Ref. Indicator Function n Power/ standby Turns on when power to the computer is turned on. Blinks when computer is in Standby (Suspend). Turns off when computer is in Hibernation or powered off. o Battery charge Turns on when computer is turned on and when battery is fast charging. Blinks for low-battery condition.
. . . . . . . . . . . . . . . . . . . . . . . . . Integrated Trackball 4 1 2 3 Integrated Trackball The integrated trackball eliminates the need to carry a mouse when traveling. The trackball n is designed to be used with either hand for cursor movement and button selection. The top button o functions as a left mouse button, and the bottom button p functions as a right mouse button. The ball q controls the pointer when rolled with your thumb.
. . . . . . . . . . . . . . . . . . . . . . . . . Rear Components 2 3 1 5 4 Rear Components Components on the Rear of Computer 2-6 Ref. Component Function n o Power connector Connects the AC Adapter cable. Parallel connector Connects optional parallel devices, such as a printer. p Serial connector Connects optional serial devices, such as a mouse or CD-ROM drive. q Keyboard/mouse connector Connects an external keyboard, mouse, or other pointing device.
. . . . . . . . . . . . . . . . . . . . . . . . . Bottom Components 2 1 Bottom Components Bottom Components Ref Component Function n o Battery compartment Contains the battery pack. Memory compartment Contains the optional memory expansion board. Taking a Look at the Computer Part Number: 262446-001 Writer: Dianne Fielden Saved by: Johnnie Abercrombie Saved Date: 08/26/96 2:30 PM 12:22 PM File Name: CH2.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 2 Taking a Look at the Computer Part Number 262446-001 File Name CH2.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 3 Using the Keyboard Keyboard features on the computer are designed to enhance its functionality. This chapter familiarizes you with the parts of the keyboard and how to use the following features: ■ Keyboard components ■ Hotkeys ■ Special function keys ■ Embedded numeric keypad Using the Keyboard Part Number: 262446-001 Writer: Dianne Fielden Saved by: JohnnieA Saved Date: 02/27/96 1:08 PM 12:24 PM File Name: CH3.
. . . . . . . . . . . . . . . . . . . . . . . . . Keyboard Components 1 2 3 4 5 7 6 7 Keyboard Keyboard Components Ref Component Function n Power button When pressed the first time, turns on the computer. When pressed once after the computer is on, initiates Standby (Suspend). When pressed the second time, exits Standby. See Chapter 4, “Managing Power,” for details. NOTE: To turn off the computer, use Windows Shut Down from the Start menu.
. . . . . . . . . . . . . . . . . . . . . . . . . Using the Hotkeys The hotkey combinations (Fn+F4 through F9) simplify special computer operations. These hotkeys cannot be accessed from an external keyboard. Hotkeys Hotkey Assignments and Functions Feature Hotkeys Function Switching to the External Monitor Fn+F4 System Beeps Fn+F5 Toggles three ways between computer display, external monitor display, or both displays simultaneously.
. . . . . . . . . . . . . . . . . . . . . . . . . Hotkey Functions and Assignments Continued Feature Quick Lock/ QuickBlank Hotkeys Fn+F6 Battery Conservation Level Fn+F7 Contrast Control Fn+F8 Function Initiates QuickLock, which disables the keyboard and mouse, and QuickBlank, which clears the screen. Enter power-on password to reactivate keyboard, mouse, and screen. Displays the battery conservation setting in a pop-up window. Use the left and right arrow keys to select a different setting.
. . . . . . . . . . . . . . . . . . . . . . . . . Customizing the Popup Window Windows allows you to set the size and location of the popup window. To access this feature, double-click the Hotkey Popup icon in the Control Panel. 1. Click the option that sets the size/location of the popup window. 2. Make the desired changes. 3. Click OK to save your changes. IMPORTANT: This popup window can be accessed only from within the applications that support the video popup mode.
. . . . . . . . . . . . . . . . . . . . . . . . . Using the Special Function Keys Some keys on the keyboard provide special functions, depending on the application you are using. These keys are described in the following table: Special Function Keys Key Function Alt Application dependent, used in combination with another key for a specific function. Check the application software documentation you are using. Backspace Moves the cursor left and deletes characters as it moves to the left.
. . . . . . . . . . . . . . . . . . . . . . . . . Using the Numeric Keypad The embedded numeric keypad is a section of the keyboard that converts to a numeric keypad when the NumLk function is activated by pressing Fn+NumLk. Use this toggle key function to enable and disable the embedded numeric keypad. Embedded Numeric Keypad Using the Keyboard Part Number: 262446-001 Writer: Dianne Fielden Saved by: JohnnieA Saved Date: 02/27/96 1:08 PM 12:24 PM File Name: CH3.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 3 Using the Keyboard Part Number 262446-001 File Name CH3.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 4 Managing Power Your computer is equipped with power features that allow you to manage power usage, extend battery operating time, and conserve battery power. Most power settings are controlled in Power Properties, located in the Control Panel.
. . . . . . . . . . . . . . . . . . . . . . . . . Power Button The power button performs the following functions: ■ Turns on the computer—Press the power button once when the computer is off, in Standby (also called Suspend), or in Hibernation. When you turn on the computer, the power/standby indicator on the status panel lights up. Power Button and Power/Standby Indicator Light ■ ■ ■ 4-2 Initiates Standby (Suspend)—Press the power button once when the computer is on.
. . . . . . . . . . . . . . . . . . . . . . . . . Standby (also called Suspend) When you finish working, or if you want to pause in the middle of your applications, press the power button once to initiate Standby. This feature puts the computer to sleep (for up to 168 hours with a fully charged battery pack), uses very little power, and saves your place in your applications. During Standby, most of the major components (hard drive, processor, and display) shut down after a period of inactivity.
. . . . . . . . . . . . . . . . . . . . . . . . . Hibernation Hibernation is a safeguard condition during which all the information in system memory is saved to the hard drive and power to the computer is turned off. When you resume work, your information is returned to the screen exactly where you left off. No information is lost.
. . . . . . . . . . . . . . . . . . . . . . . . . When to Turn Off the Computer If you plan to store the computer for an extended period, turn off the computer and remove the battery pack. This reduces the battery pack's discharge rate and extends its life. If you use the computer frequently, and you want "instant-on" convenience, you do not have to turn off the computer. Simply initiate Standby (Suspend) when you're not using it. NOTE: The battery continues to drain while the computer is in Standby.
. . . . . . . . . . . . . . . . . . . . . . . . . Using AC Power They way you connect the AC Adapter to the computer depends on the type of adapter that came with your computer. To connect the AC Adapter Follow these steps to connect the AC Adapter: 1. Connect the power cord to the AC Adapter n. 2. Plug the AC Adapter cable o into the computer. 3. Plug the power cord p into an electrical outlet. 4. Turn on the computer.
. . . . . . . . . . . . . . . . . . . . . . . . . Using Battery Power Reading the Battery Gauge The battery gauge, located on the status panel, has five indicator lights that represent the amount of power remaining in the battery pack. The indicators do not represent equal amounts of time. Instead, one indicator at a time turns on to indicate how much battery power remains. The computer is fully charged when the indicator next to the plus (+) sign turns on.
. . . . . . . . . . . . . . . . . . . . . . . . . Resolving a Low-Battery Condition When you operate the computer on battery power and the battery charge runs low, the computer beeps and the battery charge indicator on the status panel begins to blink. These signs indicate a low-battery condition. When this occurs, you need to stop work immediately and resolve the low-battery condition with external power or a new battery pack.
. . . . . . . . . . . . . . . . . . . . . . . . . Extending Battery Pack Operating Time Battery pack operating time can be extended by following these guidelines: ■ Select the high level of power conservation. See "Selecting a Battery Conservation Level" in this chapter. ■ Initiate Standby or Hibernation or turn off the computer when not in use. ■ Reduce the brightness of the display. ■ Select a shorter screen save timeout.
. . . . . . . . . . . . . . . . . . . . . . . . . Removing the Battery Pack Before removing the battery pack, complete the following steps: 1. To prevent loss of data, save your work and exit all applications. 2. If the computer is on, initiate Hibernation by pressing Fn + the power button or turn it off by pressing Shut Down on the Windows Start menu. CAUTION: Failure to save your work and turn off power to the computer can lead to loss of data. 3. Lift up the front of the computer n.
. . . . . . . . . . . . . . . . . . . . . . . . . 4. The battery compartment pops down n. Remove the battery pack o. 2 1 Removing the Battery Pack NOTE: Battery packs should be recycled or disposed of according to local regulations. Managing Power Part Number: 262446-001 Writer: JohnnieA Saved by: Johnnie Abercrombie Saved Date: 09/17/96 12:26 PM File Name: CH4.
. . . . . . . . . . . . . . . . . . . . . . . . . Inserting the Battery Pack To insert the battery pack, complete the following steps: 1. If the computer is on, turn it off by pressing Shut Down on the Windows Start menu, or initiate Hibernation by pressing Fn + the power button. 2. Lift up the front of the computer n. (The battery compartment is on the bottom of the computer.) Slide the battery release button to the right o to open the battery compartment. 3.
. . . . . . . . . . . . . . . . . . . . . . . . . Charging the Battery Pack Follow these steps to fully charge the battery pack: 1. Connect the AC Adapter to the computer and plug it into an electrical outlet. 2. Turn on the computer if you want to use it while the battery pack is charging. When the battery charge indicator turns off, the battery pack is no longer being fast-charged. It takes about 1.
. . . . . . . . . . . . . . . . . . . . . . . . . Power Properties Power Properties is a series of features that allows you to monitor how AC and battery power are used in your computer. It controls most of the computer components, including hard drive, processor, and display. To conserve the battery, the computer can be preset to shut down power to a component after a specified period of inactivity (called a timeout). In addition to other features, Power Properties allows you to preset timeouts.
. . . . . . . . . . . . . . . . . . . . . . . . . Turning Hibernation Off or On Hibernation is automatically turned on when you first set up your computer. If you want to turn off Hibernation, click the Hibernation tab in Power Properties. You can also turn it back on through the Hibernation tab. When you restart the computer, the system automatically allocates or updates your computer's disk space to adjust to the amount of current memory. CAUTION: Turning off Hibernation is not recommended.
. . . . . . . . . . . . . . . . . . . . . . . . . Battery Conservation Levels Selecting a Battery Conservation Level To extend the life of your battery, customize your own level of battery conservation or click one of three preset conservation levels. Medium is the default setting. 1 2 3 4 n High Conservation—Saves the most battery power. This level supplies the most battery life from a single charge. o Medium Conservation—Provides a balance between system performance and battery life.
. . . . . . . . . . . . . . . . . . . . . . . . . Selecting a Battery Conservation Level with Hotkeys You can also change the default levels of battery conservation by pressing Fn+F7 to display a popup window indicating the current level. Use the left or right arrow keys to select a different level. Using the AC Energy Saver The AC Energy Saver feature allows the hard disk idle and screen save timeouts to initiate after a period of computer inactivity while the computer is connected to AC power.
Part Number: 262446-001 Writer: JohnnieA Saved by: Johnnie Abercrombie Saved Date: 09/17/96 12:26 PM File Name: CH4.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 5 Using Security The security features installed on your computer allow you to customize the security measures you prefer. The computer provides security features to set passwords, QuickLock the pointing device and keyboard, and QuickBlank the screen.
. . . . . . . . . . . . . . . . . . . . . . . . . Setting Passwords Properties The Passwords icon allows you to select various software security to protect your computer against unauthorized use. To ensure privacy and security, you can set or change passwords, disable the keyboard and pointing device, or blank the screen while you are away from your computer. To get to the Passwords icon: 1. Click Start. 2. Click Settings. 3. Click Control Panel. 4. Double-click Passwords icon.
. . . . . . . . . . . . . . . . . . . . . . . . . Establishing a Power-On Password To establish your power-on password, follow these steps: 1. Click the Computer Security tab in Passwords Properties. 2. Click the Set button. 3. Enter your new password twice, then click OK. You may enter up to seven alphanumeric characters for the password. The next time you restart the computer, you will be prompted to enter your power-on password.
. . . . . . . . . . . . . . . . . . . . . . . . . If You Forget Your Power-On Password If you forget your power-on password, the computer must be disassembled and the memory cleared. Contact your Compaq authorized dealer, reseller, or service provider for assistance. Establishing a Setup Password A setup password allows you to protect your system configuration. Once this password is established, you cannot change the configuration until you enter the password.
. . . . . . . . . . . . . . . . . . . . . . . . . Deleting/Changing a Setup Password To delete/change a Setup Password, follow these steps: 1. Restart the computer by clicking Shut Down from the Windows Start menu. 2. When the cursor (a small white box) moves to the upper-right corner of the screen, press F10. The password prompt is displayed. IMPORTANT: Type carefully, for security reasons, the characters you type do not appear on the screen.
. . . . . . . . . . . . . . . . . . . . . . . . . Initiating Quick Controls Quick Controls establish security measures when your computer is turned on but not in use. After setting the power-on password in Passwords Properties, Quick Controls can be initiated in two ways: 1. With Fn+F6 hotkeys, which work only on the computer keyboard. 2. With the key combination Ctrl+Alt+L, which works on both the computer and external keyboards.
. . . . . . . . . . . . . . . . . . . . . . . . . Using a Cable Lock In order to secure your computer and prevent it from being stolen or accidentally disconnected, you may want to use a cable lock. A cable lock can be purchased from Kensington Microware Limited and major dealers worldwide. Ask for the Kensington MicroSaver Security System Model 64068. Using a Cable Lock To attach the cable lock: 1. Loop the cable around a fixed object to which you want to secure the computer. 2.
Part Number: 262446-001 Writer: Dianne Fielden Saved by: JohnnieA Saved Date: 02/27/96 1:16 PM 12:27 PM File Name: CH5.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 6 Upgrading the Computer Upgrade components can increase the functionality and performance of your computer. Compaq upgrades are easy to install. Contact your Compaq authorized reseller to determine which upgrades are available for your model computer. For detailed installation procedures, refer to the installation documentation included with the optional equipment or contact your Compaq authorized reseller.
. . . . . . . . . . . . . . . . . . . . . . . . . Installing Software An application software program performs a specific task, such as database management, word processing, financial management, or graphic illustration. Application software is different than system software or operating systems, which maintain and organize the system. Each application program usually includes its own installation program and documented installation procedures.
. . . . . . . . . . . . . . . . . . . . . . . . . . Adding Memory The computer comes standard with 8 or 16 megabytes of random access memory (RAM). Memory can be expanded with 8-, 16-, or 32-Megabyte Memory Expansion Boards. CAUTION: Electrostatic discharge can damage electronic components. Before touching a memory expansion board, ensure that you are discharged of static electricity by touching a grounded metal object. To install memory, follow these steps: 1.
. . . . . . . . . . . . . . . . . . . . . . . . . 5. Slide the memory boards into the memory slot n. The connector will snap into place when the board is correctly seated o. 2 1 Sliding Memory Boards Into Place 6. Replace the memory compartment cover. Replacing the Memory Compartment Cover 6-4 Upgrading the Computer Part Number: 262446-002 Writer: Lorise Fazio Saved by: Johnnie Abercrombie Saved Date: 08/26/96 3:20 PM 12:27 PM File Name: CH6.
. . . . . . . . . . . . . . . . . . . . . . . . . . 7. Replace the battery pack. 8. Connect the computer to electrical power and turn it on. The computer automatically recognizes the new memory and reconfigures the system. CAUTION: The connectors on the memory expansion board are all similar in appearance but do not have the same number of connector pins. Be sure you match each connector to its corresponding system board connector.
Part Number: 262446-002 Writer: Lorise Fazio Saved by: Johnnie Abercrombie Saved Date: 08/26/96 3:20 PM 12:27 PM File Name: CH6.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 7 Connecting External Equipment This chapter familiarizes you with the procedures and utilities needed to connect external equipment to your computer, including: ■ Device Manager utility ■ Add New Hardware icon ■ Printer ■ AC Adapter ■ Automobile Adapter ■ External keyboard ■ External monitor ■ Mouse or external trackball Device Manager Utility Device Manager is the primary tool for viewing and manipulating your system configuration.
. . . . . . . . . . . . . . . . . . . . . . . . . Add New Hardware Icon Add New Hardware helps you install a new piece of hardware quickly. Also, it will automatically detect installed hardware. To get to Add New Hardware, go to the Control Panel, double-click the Add New Hardware icon, and follow the instructions on the screen. Connecting a Printer To connect a printer to your computer, follow these steps: 1. Shut down the computer and printer by pressing Shut Down on the Windows Start menu. 2.
. . . . . . . . . . . . . . . . . . . . . . . . . Connecting the AC Adapter To connect the AC Adapter cable to the computer: 1. Connect the AC Adapter cable to the AC power connector on the computer. 2. Plug the AC Adapter power cord into an electrical outlet that is easily accessible and located near the computer. 3. Turn on the computer. Connecting an AC Adapter to the Computer NOTE: For more information on connecting the AC Adapter, see Chapter 4, "Managing Power.
. . . . . . . . . . . . . . . . . . . . . . . . . Connecting the Automobile Adapter To connect the Automobile Adapter to the computer: 1. Turn on the vehicle’s engine 2. Plug one end of the power cord into the automobile adapter ❶ and the other end into the AC Adapter ❷. 3. Connect the AC Adapter cable ❸ to the power connector on the computer. 4. Insert the Automobile Adapter cable into the cigarette lighter socket.
. . . . . . . . . . . . . . . . . . . . . . . . . Connecting an External Enhanced Keyboard To connect an external enhanced keyboard, complete the following steps: 1. With the computer turned on, initiate Standby (Suspend) by pressing the power button on the computer. 2. Connect the keyboard cable to the keyboard connector on the computer. 3. Exit Standby by pressing the power button. The external keyboard will be enabled and the computer keyboard will be disabled.
. . . . . . . . . . . . . . . . . . . . . . . . . Connecting an External Monitor An external VGA monitor can be connected to the computer. To connect an external monitor to the computer, follow these steps: 1. With the computer turned on, initiate Standby (Suspend) by pressing the power button on the computer. 2. Turn off the monitor. 3. Plug the monitor signal cable into the VGA connector. 4. Plug the monitor power cord into a properly grounded electrical outlet. 5.
. . . . . . . . . . . . . . . . . . . . . . . . . Connecting a Mouse or External Trackball CAUTION: To prevent damage to the computer, place the computer in Standby (Suspend) before connecting or disconnecting the mouse. To connect a mouse or trackball to the computer, follow these steps: 1. For a PS/2 mouse or trackball, with the computer turned on, initiate Standby (Suspend) by pressing the power button on the computer. To connect a serial mouse, turn off power to the computer. 2.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 7 Connecting External Equipment Part Number 262446-002 File Name CH7.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 8 Working with PCMCIA Devices PC Card devices (also called PCMCIA Cards) are credit card-sized option cards that enhance the functionality of your computer. Examples of PC Cards include modems, network interface cards, memory storage cards, and hard drive storage cards.
. . . . . . . . . . . . . . . . . . . . . . . . . Types of PC Cards Your computer is equipped with a versatile feature that allows you to connect portable external devices, such as modem, memory, or network PC Cards. PC Cards are available in various types, according to the thickness of the card: ■ Type I 3.3 mm ■ Type II 5.0 mm ■ Type III 10.
. . . . . . . . . . . . . . . . . . . . . . . . . IMPORTANT: Before buying a non-Compaq PC Card, be sure it conforms to standards set by the Personal Computer Memory Card International Association (PCMCIA). For a list of PC Cards supported on this computer, contact your Compaq authorized reseller or service provider. Also, look for this Compaq PC Card Solution seal. Cards with this logo on their packaging and advertising are supported on most Compaq computers.
. . . . . . . . . . . . . . . . . . . . . . . . . Inserting a PC Card The computer does not need to be turned off or placed in Standby (Suspend) when inserting a PC Card. To insert a PC Card, follow these steps: 1. Insert the PC Card, label side up, and gently push the card into one of the available slots. Forcing a card into the slot can damage the connector pins. IMPORTANT: A Type III card fits only in the bottom slot, slot 1. 2. In most cases, the computer automatically configures the card.
. . . . . . . . . . . . . . . . . . . . . . . . . If the card does not go in easily, make sure you are inserting it label side up. The following illustration shows the correct way to insert the card. Inserting a PC Card Working with PCMCIA Devices Part Number: 262446-001 Writer: Dianne Fielden Saved by: Dianne Fielden Saved Date: 02/28/96 12:20 PM 12:29 PM File Name: CH8.
. . . . . . . . . . . . . . . . . . . . . . . . . Removing a PC Card The computer does not need to be turned off or placed in Standby (Suspend) to remove a PC Card. To remove a card: 1. Click the PC Card indicator on the taskbar and click "Stop" for the card you want to remove. 2. When the system prompts you to remove the card, swing the top or bottom release lever to the left until the card ejects. (The PC Card release levers are located on the front of the computer on the left side.) 3.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 9 Caring for the Computer This chapter provides Compaq recommended guidelines for taking care of your computer. These guidelines, aimed at improving your computer's longevity and reducing the risk of damage, include: ■ Routine care ■ Travel guidelines ■ Shipping guidelines Caring for the Computer Part Number: 262446-001 Writer: Dianne Fielden Saved by: JohnnieA Saved Date: 02/26/96 10:43 AM 12:29 PM File Name: CH9.
. . . . . . . . . . . . . . . . . . . . . . . . . Routine Care You can keep the computer in good condition and working properly by following these guidelines: ■ Operate the computer with a battery pack installed, even when you're using external power. This supplies the battery with a constant trickle charge and ensures a fully charged battery pack the next time you turn on the computer. ■ Keep the computer away from excessive moisture and temperature extremes.
. . . . . . . . . . . . . . . . . . . . . . . . . Travel Guidelines For safety and convenience when traveling, follow these guidelines: ■ Safeguard your data before you leave on a trip by backing it up onto diskettes or tape media. ■ Take an extra backup copy of the data with you. ■ Remove the diskette from the diskette drive. ■ Disconnect the AC Adapter from the computer. Take the AC Adapter or an extra fully charged battery pack with you.
. . . . . . . . . . . . . . . . . . . . . . . . . Shipping Guidelines Should you need to ship the computer, follow these guidelines: 9-4 ■ Safeguard your data before shipping by backing it up onto diskettes or tape media. Be sure that diskettes or tapes are not exposed to electrical or magnetic impulses while stored or in transit. ■ Remove the diskette from the diskette drive. ■ Remove all PC Cards from the PC Card slots. ■ Turn off the computer and external devices. ■ Close the computer.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 10 Diagnostics The configuration and diagnostic utilities described in this chapter should be used in the following instances: ■ To change factory default settings and to set or change the system configuration, which is sometimes necessary when you add or remove optional equipment. ■ When a system configuration error is detected during the PowerOn Self-Test (POST). ■ To determine information about the operating environment of the system.
. . . . . . . . . . . . . . . . . . . . . . . . . Running Computer Checkup (TEST) Computer Checkup (TEST) is a utility that determines if the various computer devices are recognized by the system and functioning properly. Running Computer Checkup is optional but advisable after installing or connecting a new device You can display, print, or save the information generated by Computer Checkup.
. . . . . . . . . . . . . . . . . . . . . . . . . 8. Verify that Computer Checkup correctly detected the devices installed. NOTE: Devices from other manufacturers may not be detected or may be reported inaccurately. ■ If the list is correct, select OK. The test option menu is displayed again. Go to step 9. ■ If the list is incorrect, ensure that any new devices are installed properly. If you do not find an installation problem, call your Compaq authorized service provider. 9.
. . . . . . . . . . . . . . . . . . . . . . . . . Running the View System Information (Inspect Utility) The View System Information (INSPECT) utility provides information about the system once it has been configured.
. . . . . . . . . . . . . . . . . . . . . . . . . To run View System Information (INSPECT), follow these steps: 1. Turn on or restart the computer by pressing the power button. 2. As soon as the cursor is displayed in the upper-right corner of the screen, press F10. IMPORTANT: The cursor is displayed on the screen for about two seconds. If you do not press F10 during this time, you must restart the computer and try again. 3. If prompted, select the desired language.
Part Number 262446-001 File Name CH10.
. . . . . . . . . . . . . . . . . . . . . . . . . Chapter 11 Troubleshooting This chapter provides information on how to identify and correct some common hardware, memory, and software problems. It also explains several types of common messages that can be displayed on the screen.
. . . . . . . . . . . . . . . . . . . . . . . . . Interpreting Messages on the Screen Many times a message or prompt is displayed on the screen. However, a message does not necessarily mean that an error condition exists. It may be nothing more than an information message about what the computer is doing or a prompt reminding you to enter information or press a key. The following list shows typical examples of information messages: ■ A number might be displayed.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Battery Problems Some common causes and solutions for battery problems are listed in the following table. The "Solving Power Problems" section in this chapter also may be helpful to you. Battery Problems and Solutions Problem Possible Cause Computer won't turn on Battery pack is when battery pack is discharged. inserted and AC Adapter is unplugged. Solution Connect the computer to an external power source and charge the battery pack.
. . . . . . . . . . . . . . . . . . . . . . . . . Battery Problems and Solutions Continued Problem Possible Cause Solution Battery charge indicator blinks for low-battery condition, but computer didn't beep. Low-battery beeps are turned off. Click the Conservation tab on the Power icon in the Control Panel and enable low-battery warning beeps. System beeps are off. Press Fn+F5 to turn on the system beeps. Battery charge indicator doesn't turn on. Battery pack is already charged.
. . . . . . . . . . . . . . . . . . . . . . . . . Battery Problems and Solutions Continued Problem Possible Cause Solution Battery charge doesn't last as long as expected. Battery pack is being exposed to high temperatures. Keep computer at a cooler temperature and recharge battery pack. Battery pack is being exposed to cold temperatures. Put computer in a warmer place and recharge battery pack. Battery pack has partially self-discharged. Recharge the battery pack.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Diskette/Diskette Drive Problems Some common causes and solutions for diskette/diskette drive problems are listed in the following table: Diskette/Diskette Drive Problems and Solutions Problem Possible Cause Solution Diskette drive indicator stays on. Diskette is damaged. Run ScanDisk on the diskette. Click Start, Programs, Accessories, System Tools, ScanDisk, and follow the directions. Remove diskette and reinsert.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Hard Drive Problems Some common causes and solutions for hard drive problems are listed in the following table. Chapter 10, "Diagnostics," also may help you solve hard drive problems. CAUTION: Remove or install the hard drive only when the computer is off, unplugged, and the battery pack is removed. Do not remove or install a hard drive while the computer is on, in Standby (Suspend), or in Hibernation.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Hardware Installation Problems Some common causes and solutions for hardware installation problems are listed in the following table. Hardware Installation Problems and Solutions Problem Possible Cause Solution New device is not recognized as part of the computer system. Standby was not initiated before device was connected. Initiate Standby, connect the device, and then exit Standby. The system did not automatically configure the new device.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Keyboard and Embedded Numeric Keypad Problems Some common causes and solutions for keyboard and embedded numeric keypad problems are listed in the following table. NOTE: Consult the online Compaq Reference Guide or the Keyboard Reference on the use of the NumLk key and the embedded numeric keypad. Solving Keyboard/Embedded Numeric Keypad Problems Problem Probable Cause Solution Embedded numeric keypad on the computer keyboard is disabled.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Memory Problems Some common causes and solutions for memory problems are listed in the following table. Memory Problems and Solutions Problem Possible Cause Solution Memory count during Power-On Self-Test (POST) is incorrect. Optional memory expansion board is installed incorrectly. Ensure that the memory expansion board has been installed correctly.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving PC Card Problems Some common causes and solutions for PC Card problems are listed in the following table. PC Card Problems and Solutions Problem Possible Cause The computer does not Card is not inserted beep when a PC Card properly. is inserted. Card or card driver is not compatible with your computer. PC Card does not work. Solution Ensure the card is inserted correctly. Remove and reinsert the card.
. . . . . . . . . . . . . . . . . . . . . . . . . PC Card Problems and Solutions Continued Problem Possible Cause Solution Fax/modem PC Card does not work. You are trying to access the card using the wrong COM port. Right click My Computer on the Windows desktop. Left click Properties, then Device Manager, and double-click Port Settings to view the COM port settings. Telephone cord is not Check and secure telephone plugged in all the way. cord connection.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Power Problems Some common causes and solutions for power problems are listed in the following table. The "Solving Battery Problems" section in this chapter also may be helpful. Power Problems and Solutions Problem Possible Cause Solution Computer won't turn on and battery pack is not inserted. Computer is not connected to a power source. Insert battery pack or connect to power cord or Automobile Adapter.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Printer Problems Some common causes and solutions for printer problems are listed in the following table. Printer Problems and Solutions Problem Possible Cause Printer won't turn on. The cables may not be Ensure that the cables are connected properly, or the properly connected and that printer is unplugged. the AC Adapter is connected to the electrical outlet. Printing device is not Select the printer in Windows selected. Printer Setup.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Display Screen Problems Some common causes and solutions for display screen problems are listed in the following table. Display Screen Problems and Solutions Problem Possible Cause Solution Characters are dim. Brightness/Contrast controls not properly set. Press hotkeys Fn+F9 to adjust brightness. On models with a passive matrix display, you can also press Fn+F8 to adjust contrast. Computer screen is in direct light.
. . . . . . . . . . . . . . . . . . . . . . . . . Display Screen Problems and Solutions Continued Problem Possible Cause Screen is blank, the System has entered a power/standby low-battery condition. indicator is blinking, and the battery charge indicator is blinking. Computer screen is blank and the screen on an external monitor displays information. External monitor was turned on before the computer was turned on. Screen is blank and keyboard is locked. QuickLock and QuickBlank were initiated.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Software Application Problems Most software application or installation problems occur because of one or more of the following conditions: ■ Application was not installed correctly. ■ Memory was not allocated correctly. ■ Conflict exists between applications. Software Application Problems and Solutions Problem Probable Cause Solution Cannot use an application. The application has not been added to the PATH statement.
. . . . . . . . . . . . . . . . . . . . . . . . . Solving Trackball/Mouse Problems Some common causes and solutions for trackball and mouse problems are listed in the following table. Trackball/Mouse Problems and Solutions Problem Possible Cause Solution External PS/2 trackball or mouse does not work. External serial mouse does not work Standby (Suspend) was not initiated before device was connected. The computer was not shut down before connecting the device.
. . . . . . . . . . . . . . . . . . . . . . . . . Trackball/Mouse Problems and Solutions Continued Problem Possible Cause Solution Device driver is loaded but trackball/mouse doesn't work. Wrong mouse is selected. To select the right mouse, access the Start menu via the keyboard by pressing Ctrl+Esc. Use the arrow keys to get to Settings, then Control Panel, and press Enter. Use arrow keys to select the System icon and press Enter. Use the arrow keys to access Device Manager.
. . . . . . . . . . . . . . . . . . . . . . . . . Cleaning the Trackball Operate the trackball with clean hands. Under normal conditions, you only need to wipe the computer case and trackball with a dry soft cloth. If the cursor begins to skip or move abnormally when using the trackball, follow these steps to remove and clean it: 1. Turn off the computer by pressing Shut Down from the Start menu. 2. Remove the battery pack and disconnect the AC Adapter if it is plugged in. 3.
. . . . . . . . . . . . . . . . . . . . . . . . . Cleaning Inside the Trackball Assembly To remove dust and build-up on the inside surfaces of the trackball assembly: 1. Ensure that the computer is off, the battery pack is removed, the AC Adapter is disconnected, and the ball is removed. 2. Remove any large particles of debris that have fallen into the trackball housing. 3. Carefully wipe inside the cage to remove residue from the surfaces.
. . . . . . . . . . . . . . . . . . . . . . . . . 5. Allow the parts to air dry before reassembling. 6. Replace the ball in the trackball cage. 7. Replace the retaining ring by aligning the notches. Then use the trackball tool to turn the retaining ring clockwise until it snaps into place. 8. Replace the battery pack and reconnect the AC Adapter if necessary. 11-22 Troubleshooting Part Number: 262446-001 Writer: Dianne Fielden Saved by: Johnnie Abercrombie Saved Date: 09/17/96 07:49 AM File Name: CH11.
. . . . . . . . . . . . . . . . . . . . . . . . . Servicing the Computer To get help from Compaq Customer Support or to find a Compaq authorized reseller or service provider location, call one of the numbers in the "Worldwide Telephone Numbers" in Chapter 1. Your Compaq authorized reseller or service provider is available to answer your questions, install optional equipment, and service your computer.
Part Number 262446-001 File Name CH11.
. . . . . . . . . . . . . . . . . . . . . . . . . Appendix A Specifications This appendix provides physical and performance specifications for subassemblies of the computer: ■ Computer ■ AC Adapter ■ Displays (Color STN and TFT) ■ Auto Adapter ■ Diskette Drive ■ Battery Pack ■ Hard Drives Computer Models 1110, 1120, 1125, 1120T, 1130, 1130T 1135 U.S. Metric Dimensions 10.4" Color STN 10.4" Color STN 10.4" Color TFT 8.9" x 11.9" x 2.25" 8.9" x 11.9" x 2.25" 8.9" x 11.9" x 2.25" 22.
. . . . . . . . . . . . . . . . . . . . . . . . . Color STN (10.4 in) Display Computer Models 1110, 1120, 1125, 1130, 1135 U.S. Metric Dimensions (display size) Height Width Number of Colors 6.3 in 8.4 in 256 16.0 cm 21.3 cm Color Palette 256 K Contrast Ratio 20:1 Brightness 90 NIT Refresh Rate 60 Hz Pixel Resolution Pitch Format (models 1130, 1135) Format (models 1110, 1120, 1125) Configuration A-2 0.33 x 0.
. . . . . . . . . . . . . . . . . . . . . . . . . Color TFT (10.4 in) Display Computer Models 1120T, 1130T U.S. Metric Dimensions (display size) Height Width Number of Colors 6.3 in 8.4 in 256 16.0 cm 21.3 cm Color Palette 256 K Contrast Ratio 100:1 Brightness 90 NIT Refresh Rate 60 Hz Pixel Resolution Pitch Format (model 1130T) Format (model 1120T) Configuration 0.33 x 0.
. . . . . . . . . . . . . . . . . . . . . . . . . Diskette Drive Diskettes Size High Density (MB) Low Density (KB) Light Height Bytes per Sector Sectors per Track High Density Low Density Tracks per Side High Density Low Density Read/Write Heads Average Access Time (ms) Track-to-Track (high/low) Average (high/low) Settling Time (ms) Latency Average (ms) A-4 3.5 in (8.9 cm) 1.44 720 Green One-third 512 18 9 80 80 2 3/3 94/94 15 100 Specifications Part Number: 262446-002 File Name: APPA.
. . . . . . . . . . . . . . . . . . . . . . . . . Hard Drives Model Standard Configurations 810 MB 1.08 GB 815.9 MB 814.3 1.088 GB 65 65 4.0 x 2.740 x .5 100 x 70 x 12.7 4.0 x 2.740 x .5 100 x 70 x 12.7 27.4 to 54 up to 16.7 27.4 to 54 16.
. . . . . . . . . . . . . . . . . . . . . . . . . AC Adapter U.S. Metric Dimensions 5.0 x 3.0 x 1.3 in. 12.7 x 7.6 x 3.3 cm Power Supply Ratings Rated Voltage Range Rated Input Current Rated Input Frequency Maximum Output Voltage Maximum Output Current Maximum Output Power 100-120/220-240 V 0.8/0.4 Amp 50 - 60 Hz 16.5 V dc 2.6 Amp 27 W Automobile Adapter U.S. Rated Input Voltage Rated Input Current Maximum Output Voltage Maximum Output Current Maximum Output Power A-6 10 - 18 V dc 2.4 Amp 17.
. . . . . . . . . . . . . . . . . . . . . . . . . Extended Life Nickel Metal Hydride Battery Pack Dimensions Height Length Width Weight Energy Nominal Open Circuit Voltage Rated Capacity Standard Recharge Rate Environmental Requirements Operating temperatures Storage temperatures No time limit Not longer than 3 months U.S. Metric 0.724 in 8.07 in 2.04 in 1.09 lb 1.84 cm 20.5 cm 5.18 cm 0.495 Kg 10.
Part Number: 262446-002 File Name: APPA.
. . . . . . . . . . . . . . . . . . . . . . . . . Appendix B POST Error Messages The following table lists selected error codes that you may encounter during the Power-On Self-Test (POST). The POST occurs after you first turn on the computer. A successful POST is followed by one or two short beeps. If one of the error codes listed below is displayed on the screen during POST, follow the instructions in the recommended action.
. . . . . . . . . . . . . . . . . . . . . . . . . Post Error Codes Continued Error Code B-2 Beeps Probable Cause Action 164-Memory Decrease Detected 2S Discrepancy in the memory size found compared to the one stored in CMOS If you removed a memory expansion board prior to turning on the computer, no action is required. Otherwise, contact a Compaq authorized service provider. 208-Invalid Memory Expansion Board None The memory expansion board is an invalid type Replace memory expansion board.
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
Part Number:262446-001 Writer: Dianne Fielden Saved by: JohnnieA Saved Date: 02/26/96 1:26 PM 12:17 PM File Name: APPC.
. . . . . . . . . . . . . . . . . . . . . . . . . Appendix D Power Cord Set Requirements The wide-range input feature of your AC Adapter permits it to operate from any line voltage between 100 to 240 volts AC. The power plug or power cord set (appliance coupler, flexible cord, and wall plug) you received with your AC Adapter meets the requirements for use in the country where you purchased your computer.
. . . . . . . . . . . . . . . . . . . . . . . . . Country-Specific Requirements Power Cord Set Requirements Country Accredited Agency Applicable Note Numbers Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan JIS 3 The Netherlands KEMA 1 Norway NEMKO 1 Sweden SEMKO 1 Switzerland SEV 1 United Kingdom BSI 1 United States UL 2 Notes: 1.
. . . . . . . . . . . . . . . . . . . . . . . . . 3. Appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration number in accordance with the Japanese Dentori Law. Flexible cord must be Type VFF, VSF or VTF, 2-conductor, 0.75 mm2 conductor size. Wall plug must be a twopole type with a Japanese Industrial Standard C8303 (15A, 125V) configuration.
. . . . . . . . . . . . . . . . . . . . . . . . . Appendix D Power Cord Set Requirements Part Number: 262446-001 Writer: Dianne Fielden Saved by: JohnnieA Saved Date: 02/26/96 1:22 PM 12:18 PM File Name: APPD.
. . . . . . . . . . . . . . . . . . . . . . . . . Appendix E Regulatory Agency Identification Numbers The following options have been evaluated for use with your computer. These Compaq approved options can be identified by their assigned series numbers that are listed below. To ensure continued reliable and safe operation of your computer, only these options should be used.
. . . . . . . . . . . . . . . . . . . . . . . . . Appendix E Regulatory Agency Identification Numbers Part Number: 262446-001 Writer Dianne Fielden Saved by: JohnnieA Saved Date: 02/29/96 11:54 AM 12:19 PM File Name: APPE.
. . . . . . . . . . . . . . . . . . . . . . . . . Index A AC Adapter, 2-7, 4-6, 7-3 specifications, A-6 Add New Hardware icon, 7-2 application software installing, 6-2 AUTOEXEC.BAT, 11-18 Automobile Adapter, 7-4 specifications, A-6 B backlight CSTN (10.4 in), A-2 CTFT (10.4 in), A-3 battery battery gauge indicators, 4-7 CSTN (10.4 in), A-1 CTFT (10.
. . . . . . . . . . . . . . . . . . . . . . . . . computer routine care, 9-2 shipping, 9-4 travel guidelines, 9-3 computer checkup (TEST) running, 10-2 configuration and diagnostics menu accessing, 10-1 connectors, 2-1 AC power, 2-7 external monitor, 2-7 keyboard/mouse, 2-7, C-2 monitor, C-3 parallel, 2-7, C-1 PC Card, C-4 printer, 7-2 serial, 2-7, C-2 contrast ratio CSTN (10.4 in), A-2 CTFT (10.4 in), A-3 controls brightness, 3-5 contrast, 3-5 CSTN (10.
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . P parallel connector, 2-7, C-1 passwords, 5-2 power on password, 5-2 setup password, 5-4 PC Card compatibility, 8-3 connector, C-4 inserting, 8-1, 8-4 PC Card Solution logo, 8-3 problems, 11-12 removing, 8-6 slots, 2-2 types, 8-1, 8-2 PC Card release lever, 8-6 PCMCIA. See PC Card PCMCIA. See PC Card, 8-1 pixel resolution CSTN (10.4 in), A-2 CTFT (10.4 in), A-3 POST.
. . . . . . . . . . . . . . . . . . . . . . . . . sound problems, 11-18 specifications AC Adapter, A-6 Automobile Adapter, A-6 battery pack, A-7 CSTN (10.4 in), A-2 CTFT (10.4 in), A-3 diskette drive, A-4 monitor, 7-6 Standby, 2-3, 2-5, 3-2 exiting, 4-3 extending battery operating time, 4-9 initiating, 4-3 status panel, 2-3, 3-2 indicators, 2-4, 2-5 storage temperatures for battery pack, 11-5 Suspend.
Writer: JohnnieA - Saved by: Johnnie Abercrombie - Saved date: 04/25/96 10:08 AM Part Number: 189164-001 - File name: INDEX.
