System information

16-4 Troubleshooting
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Carey Gregg Saved by: Carey Gregg Saved date: 09/23/98 1:07 PM
Part Number: 316216-003 File name: Ch16.doc
Solving Battery Problems
Problem Possible Cause Solution
Computer is beeping
and battery charge
light is blinking
The computer has
entered a low battery
condition.
Save your information,
exit all applications, and
turn off the computer.
If available, immediately
connect the computer to
an external power
source.
If an external power
source is not available, in
Windows 95, initiate
Hibernation by pressing
Fn + the suspend button,
or let the computer go
into Hibernation
automatically.
Remember that the
computer has not
completed Hibernation
until all lights are off.
Replace the battery pack.
Charge the battery pack.
Battery charge light
is blinking but
computer does not
beep
Computer entered a
low battery condition
while low battery
warning beeps and/or
system beeps are
turned down or off.
Immediately connect the
computer to an external
power source. If an
external power source is
not available and you are
running Windows 95, be
sure that Hibernation is
enabled, then initiate
Hibernation by pressing
Fn + the suspend button,
or let the computer go
into Hibernation
automatically. The
computer has not
completed Hibernation
until all lights are off.
Enable low battery
warning beeps:
1. Click the
Conservation
Settings tab in Power
Properties and
enable low battery
warning beeps.
2. Press the Fn
+
F5
hotkeys to adjust
volume for system
warning beeps.