System information

7-14 Using the Internal Modem
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Carey Gregg Saved by: Carey Gregg Saved date: 09/23/98 1:05 PM
Part Number: 316216-003 File name: Ch07.doc
Advanced AT Commands
Command Description
&Cn Data Carrier Detect Options.
&Dn Data Terminal Ready Option.
&F Load Factory Defaults.
&Gn Guard Tone Option.
&Kn Local Flow Control Selection.
&Mn Asynchronous Communications Mode.
&Qn Asynchronous Communications Mode.
&Sn Data Set Ready Option.
&Tn Test Command Selection.
&V View Current Configuration.
&W Store Current Configuration.
&Zn Store Telephone Number.
\J Adjust Bits/s Rate Control.
\Nn Error Control.
\Qn Local Flow Control Selection.
\Tn Inactivity Timer.
\Vn Protocol Result Code.
-Cn Data Calling Tone.
%B View Numbers in Blacklist.
%Cn Data Compression Control.
Fax Commands
Command Description
+F<command>
=?
Report Operating Capabilities.
+F<command>
=n?
Report Supported Parameters.
+FCLASS? Report Active Configuration.
+FCLASS=n Select Service Class.
+FTS=n Stop Transmission and Wait.
+FRS=n Receive Silence.