Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ArmadaStation Removal and Replacement Procedures
5-51
5. Select the slot into which the expansion board is to be inserted: PCI expansion
boards are installed in the shorter slots
1
; ISA expansion boards are installed in the
longer slots
2
(Figure 5-49).
Figure 5-49.
Expansion Board Slots
6. Align the bracket on the left side of the expansion board with the expansion slot on
the left side of the ArmadaStation.
7. Push the expansion board into the expansion slot until the connector is seated.
8. Secure the expansion board to the base assembly by installing the screw removed in
Step 3.
Reverse the installation procedure described above to remove an expansion board.
Once an expansion board has been installed, its internal connector can be accessed on
the lower right side of the ArmadaStation. If the expansion board has a cable, refer to
the documentation included with the board for connection information.