Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-4
Armada MiniStation Removal and Replacement Procedures
6.4 External Components
This section describes the removal and replacement procedures that do not require
access to the internal components of the Armada MiniStation. This includes:
■ Compaq logo
■ Feet
Compaq Logo
A Compaq logo should be installed on the Armada MiniStation or monitor support
cover only if the old logo is damaged or removed. The logo is an adhesive-backed label.
Remove the protective covering from the adhesive back, and install the logo in its
location on the Armada MiniStation (Figure 6-4). The logo reads from left to right
when viewed from the front of the unit.
Figure 6-4.
Installing a Compaq Logo