Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ArmadaStation Removal and Replacement Procedures
5-13
To install the upper case assembly, follow these steps.
1. Align the front edge of the upper case assembly with the front edge of the base
assembly
1
(Figure 5-13).
2. Swing the back of the upper case assembly back and down until it rests on the base
assembly
2
.
Figure 5-13.
Installing the Upper Case Assembly
3. Replace the three upper case screws.
NOTE: When installing the upper case assembly, make sure the ribs on the center of
the base assembly are engaged in the slot in the front of the upper case assembly.