Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-38
ArmadaStation Removal and Replacement Procedures
5.11 Left Speaker Assembly
The left speaker assembly consists of the left speaker, its cover, and its insulator. To
remove the left speaker assembly, follow these steps:
1. Prepare the ArmadaStation for disassembly (Section 5.3).
2. Remove the alignment tray assembly (Section 5.4).
3. Remove the rear panel assembly (Section 5.5).
4. Remove the upper case assembly (Section 5.6).
5. Remove the drive cage shield (Section 5.7).
6. Remove the three screws
1
securing the left speaker assembly to the base assembly
(Figure 5-37).
7. Disconnect the left speaker assembly cable
2
from the backplane connector.
8. Lift the speaker assembly and insulator
3
from the base assembly.
Figure 5-37.
Removing the Left Speaker Assembly
Reverse the removal procedure described above to install the left speaker assembly.