Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ArmadaStation Removal and Replacement Procedures

5-45

3. Bend the control panel ground cable up and over the top surface of the control panel

housing.

4. Insert the control panel assembly into the base assembly, making sure the pin on

which the actuator spring sits

fits into the alignment hole in the base assembly

(Figure 5-43).

NOTE: Be careful not to trip the security actuator during the control panel assembly

installation.

Figure 5-43.

Installing the Control Panel Assembly

NOTE: Make sure the control panel cable does not get pinned underneath the control

panel assembly. The cable should rest in the right half-height bay when the control

panel assembly is installed.