Specifications

5-6 Removal and Replacement Procedures
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: JAbercrombie Saved date: 07/06/00 5:06 PM
Part Number: 128679-004 File name: Ch05
Installing a Modem or Modem/Network Interface Card
1. Remove the mini PCI slot cover.
2. Remove the two screws
that secure the modem or modem/NIC to
the system board (Figure 5-4).
3. Make sure the appropriate RJ11/RJ45 cover(s) are removed from
the base enclosure.
4. Install the card into the mini PCI slot, making sure to seat the card
connector on the system board
.
Figure 5-4. Installing a Modem or Modem/Network Interface Card
Reverse the installation procedure described above to remove a modem
or modem/Network Interface Card.