Operating instructions

Setting Jumpers A-9
A.4 Remove the Floppy Disk Enclosure (DS10 Only)
To access the jumpers, remove the floppy disk drive enclosure
for DS10 systems, and the hard disk(s) and/or floppy/CD-ROM
drive for DS10L systems.
Figure A–5 Removing the DS10 Floppy Disk
1
2
PK1018-99
1. Hold on to the cylinder pins, which secure the floppy disk enclosure. Pull
the pins toward the center
➊.
2.
Pull the floppy drive unit back and up ➋.
3.
Place the unit on top of the CD-ROM drive. You do not need to remove the
cables. Cable lengths have been designed to move the unit out of the way
without disconnecting.