Specifications

4–18 Maintenance & Service Guide
Removal & Replacement Procedures
4.14 Mass Storage Devices
4.14.1 Drive Positions
The W8000 can house up to seven mass storage devices. The following illustration identifies
the physical drive locations. Refer to the corresponding table for a list of the recommended
drive configurations.
Ä
CAUTION: If a drive is not installed in bays 5 or 6 or if the bays are empty, be sure an
EMI/cooling shield is installed to ensure proper airflow and cooling.
Item Component Description
1
Bay 1 Part of the removable hard drive cage. A 3.5-inch, third-height
bay that supports a 1.0-inch hard drive or a 1.6-inch hard drive.
2
Bay 2 Part of the removable hard drive cable. A 3.5-inch, third-height
bay that supports a 1.0-inch hard drive. Bay 2 is not available
when a 1.6-inch hard drive is installed ion either bay 1 or bay 3.
3
Bay 3 Part of the removable hard drive cage. A 3.5-inch, third-height
bay that supports a 1.0-inch hard drive or a 1.6-inch hard drive.
4
Bay 4 5.25-inch, half-height bay that supports 1.0-inch or 1.6-inch
storage devices. Either a CD-ROM drive or DVD-ROM drive is
shipped in bay 4.
5
Bay 5* 5.25-inch, half-height bay supporting 1.0-inch or 1.6-inch storage
devices.
6
Bay 6*
5.25-inch, half-height bay supporting 1.0-inch or 1.6-inch
storage devices.
7
Bay 7 3.5-inch, third-height bay that supports a 1.0-inch device. A
standard 3.5-inch diskette drive is shipped in bay 7.
*An optional Zip drive can be installed in bay 5 or 6.