Technical data

4–26 Troubleshooting
■❍●❍❍●●
13 Controller Module memory parity is
not working.
Replace controller.
■❍●❍●❍❍
14 Controller Module memory controller
timer has failed.
Replace controller.
■❍●●❍❍●
15 The Controller Module memory
controller interrupt handler has
failed.
Replace controller.
■❍●●●●❍
1E During the diagnostic memory test,
the Controller Module memory
controller caused an unexpected
Non-Maskable Interrupt (NMI).
Replace controller.
■●❍❍●❍❍
24 The card’s code image changed
when the contents were copied to
memory.
Replace controller.
■●●❍❍❍❍
30 The JSRAM battery is bad. Replace controller.
■●●❍❍●❍
32 First-half diagnostics of the Time of
Year Clock failed.
Replace controller.
■●●❍❍●●
33 Second-half diagnostics of the Time
of Year Clock failed.
Replace controller.
■●●❍●❍●
35 The processor bus-to-device bus
bridge chip is bad.
Replace controller.
■●●●❍●●
3B There is an unnecessary interrupt
pending .
Replace controller.
■●●●●❍❍
3C There was an unexpected fault
during initialization.
Replace controller.
Table 4–4 Flashing OCP Patterns (Continued)
Pattern OCP
Code
Error Repair Action