Technical data

5–36 Event Reporting: Templates and Codes
03324002 SCSI bus selection timeout.
03330002 Device power on reset.
03344002 Target assertion of REQ after WAIT DISCONNECT.
03354002 During device initialization a Test Unit Ready command or a Read
Capacity command to the device failed.
03364002 During device initialization the device reported a deferred error.
03374002 During device initialization the maximum number of errors for a data
transfer operation was exceeded.
03384002 Request Sense command to the device failed.
03394002 Command timeout.
033A4002 Disconnect timeout.
033B4002 Unexpected bus phase.
033C4002 The device unexpectedly disconnected from the SCSI bus.
033D4002 Unexpected message.
033E4002 Message Reject received on a valid message.
033F0101 No command control structures available for passthrough device
operation.
03402002 Device port SCSI chip reported gross error.
03410101 Miscellaneous SCSI Port Driver coding error.
03420101 A passthrough device related internal error code was reported which is
not recognized by the Fault Management firmware.
03434002 During device initialization the device reported unexpected standard
SCSI Sense Data.
Table 5–1 Instance Codes (Continued)
Instance Code Description Template