Technical data

5–42 Event Reporting: Templates and Codes

03F10502 The SWAP interrupt from the device port indicated by the Associated

Port field can not be cleared. All SWAP interrupts from all ports will be

disabled until corrective action is taken. When SWAP interrupts are

disabled, both controller front panel button presses and removal/

insertion of devices are not detected by the controller. Note that in this

instance the Associated Target, Associated Additional Sense Code, and

Associated Additional Sense Code Qualifier fields are undefined.

03F20064 The SWAP interrupts have been cleared and re-enabled for all device

ports. Note that in this instance the Associated Port, Associated Target,

Associated Additional Sense Code, and Associated Additional Sense

Code Qualifier fields are undefined.

03F30064 An asynchronous SWAP interrupt was detected by the controller for the

device port indicated by the Associated Port field. Possible reasons for

this occurrence include:

device insertion or removal.

shelf power failure.

SWAP interrupts reenabled.

Note that in this instance the Associated Target, Associated Additional

Sense Code, and Associated Additional Sense Code Qualifier fields are

undefined.

03F40064 Device services had to reset the port to clear a bad condition. Note that

in this instance the Associated Target, Associated Additional Sense

Code, and Associated Additional Sense Code Qualifier fields are

undefined.

Table 5–1 Instance Codes (Continued)

Instance Code Description Template