Manualshelf

Technical data

ManualsBrandsCompaq ManualsNetwork CardHSZ80
231232233234235236237238239240
5–57
Compaq HSZ80 Array Controller ACS Version 8.3 Maintenance and Service Guide
01950188 An error has occurred that caused the FX to be reset, when not permissible.
■ Last Failure Parameter [0] contains the value of read diagnostic register 0.
■ Last Failure Parameter [1] contains the value of read diagnostic register 1.
■ Last Failure Parameter [2] contains the value of write diagnostic register 0.
■ Last Failure Parameter [3] contains the value of write diagnostic register 1.
■ Last Failure Parameter [4] contains the IBUS address of error register.
■ Last Failure Parameter [5] contains the PCFX PDAL control/status register.
■ Last Failure Parameter [6] contains the PCFX CDAL control/status register.
■ Last Failure Parameter [7] contains the current PDAL address of error register.
01960186 The Ibus is inaccessible.
■ Last Failure Parameter [0] contains the value of read diagnostic register 0.
■ Last Failure Parameter [1] contains the value of read diagnostic register 1.
■ Last Failure Parameter [2] contains the value of read diagnostic register 2.
■ Last Failure Parameter [3] contains the value of write diagnostic register 0.
■ Last Failure Parameter [4] contains the value of write diagnostic register 1.
■ Last Failure Parameter [5] contains the IBUS address of error register.
01970188 Software indicates all NMI causes cleared, but some remain.
■ Last Failure Parameter [0] contains the value of read diagnostic register 0.
■ Last Failure Parameter [1] contains the value of read diagnostic register 1.
■ Last Failure Parameter [2] contains the value of read diagnostic register 2.
■ Last Failure Parameter [3] contains the value of write diagnostic register 0.
■ Last Failure Parameter [4] contains the value of write diagnostic register 1.
■ Last Failure Parameter [5] contains the IBUS address of error register.
■ Last Failure Parameter [6] contains the PCFX PDAL control/status register.
■ Last Failure Parameter [7] contains the PCFX CDAL control/status register.
Table 5–3 Last Failure Codes (Continued)
Code Description