Technical data

5–68 Event Reporting: Templates and Codes
02F90100 A call to EXEC$ALLOCATE_MEM_ZEROED failed to return memory when allocating structures
for read ahead caching.
02FA0100 A read ahead caching data structure (RADD) is inconsistent.
02FB2084 A processor interrupt was generated by the controller’s XOR engine (FX), indicating an
unrecoverable error condition.
■ Last Failure Parameter [0] contains the FX Control and Status Register (CSR).
■ Last Failure Parameter [1] contains the FX DMA Indirect List Pointer register (DILP).
■ Last Failure Parameter [2] contains the FX DMA Page Address register (DADDR).
■ Last Failure Parameter [3] contains the FX DMA Command and control register (DCMD).
02FC0180 The FX detected a compare error for data that was identical. This error has always previously
occurred due to a hardware problem.
02FD0100 The controller has insufficient free memory to restore saved configuration information from
disk.
02FE0105 A field in the VSI was not cleared when an attempt was made to clear the interlock.
■ Last Failure Parameter [0] contains NV index of the VSI on which the problem was found.
■ Last Failure Parameter [1] contains the contents of the enable_change field of the VSI,
which should be zero.
■ Last Failure Parameter [2] contains the contents of the desired_state field of the VSI,
which should be zero.
■ Last Failure Parameter [3] contains the contents of the completion_routine field of the
VSI, which should be zero.
■ Last Failure Parameter [4] contains the contents of the open_requests field of the VSI,
which should be zero.
03010100 Failed request for port-specific scripts memory allocation.
03020101 Invalid SCSI direct-access device opcode in misc command DWD.
■ Last Failure Parameter [0] contains the SCSI command opcode.
Table 5–3 Last Failure Codes (Continued)
Code Description