Technical data

5–69
Compaq HSZ80 Array Controller ACS Version 8.3 Maintenance and Service Guide
03040101 Invalid SCSI CDROM device opcode in misc command DWD.
■ Last Failure Parameter [0] contains the SCSI command opcode.
03060101 Invalid SCSI device type in PUB.
■ Last Failure Parameter [0] contains the SCSI device type.
03070101 Invalid CDB Group Code detected during create of misc cmd DWD
■ Last Failure Parameter [0] contains the SCSI command opcode.
03080101 Invalid SCSI OPTICAL MEMORY device opcode in misc command DWD.
■ Last Failure Parameter [0] contains the SCSI command opcode.
03090101 Failed request for allocation of pci miscellaneous block Last Failure Parameter [0] contains the
failed dwd command class.
030A0100 Error DWD not found in port in_proc_q.
030B0188 A dip error was detected when pcb_busy was set.
■ Last Failure Parameter [0] contains the PCB port_ptr value.
■ Last Failure Parameter [1] contains the new info NULL-SSTAT0-DSTAT-ISTAT.
■ Last Failure Parameter [2] contains the PCB copy of the device port DBC register.
■ Last Failure Parameter [3] contains the PCB copy of the device port DNAD register.
■ Last Failure Parameter [4] contains the PCB copy of the device port DSP register.
■ Last Failure Parameter [5] contains the PCB copy of the device port DSPS register.
■ Last Failure Parameter [6] contains the PCB copies of the device port SSTAT2/SSTAT1/
SSTAT0/DSTAT registers.
■ Last Failure Parameter [7] contains the PCB copies of the device port LCRC/RESERVED/
ISTAT/DFIFO registers.
031E0100 Can’t find in_error dwd on in-process queue.
031F0100 Either DWD_ptr is null or bad value in dsps.
03280100 SCSI CDB contains an invalid group code for a transfer command.
Table 5–3 Last Failure Codes (Continued)
Code Description