Technical data

5–73
Compaq HSZ80 Array Controller ACS Version 8.3 Maintenance and Service Guide
033E0108 An attempt was made to restart a device port at the SDP DBD.
■ Last Failure Parameter [0] contains the PCB port_ptr value.
■ Last Failure Parameter [1] contains the PCB copy of the device port TEMP register.
■ Last Failure Parameter [2] contains the PCB copy of the device port DBC register.
■ Last Failure Parameter [3] contains the PCB copy of the device port DNAD register.
■ Last Failure Parameter [4] contains the PCB copy of the device port DSP register.
■ Last Failure Parameter [5] contains the PCB copy of the device port DSPS register.
■ Last Failure Parameter [6] contains the PCB copies of the device port SSTAT2/SSTAT1/
SSTAT0/DSTAT registers.
■ Last Failure Parameter [7] contains the PCB copies of the device port LCRC/RESERVED/
ISTAT/DFIFO registers.
033F0108 An EDC error was detected on a read of a soft-sectored device path not yet implemented.
■ Last Failure Parameter [0] contains the PCB port_ptr value.
■ Last Failure Parameter [1] contains the PCB copy of the device port TEMP register.
■ Last Failure Parameter [2] contains the PCB copy of the device port DBC register.
■ Last Failure Parameter [3] contains the PCB copy of the device port DNAD register.
■ Last Failure Parameter [4] contains the PCB copy of the device port DSP register.
■ Last Failure Parameter [5] contains the PCB copy of the device port DSPS register.
■ Last Failure Parameter [6] contains the PCB copies of the device port SSTAT2/SSTAT1/
SSTAT0/DSTAT registers.
■ Last Failure Parameter [7] contains the PCB copies of the device port LCRC/RESERVED/
ISTAT/DFIFO registers.
03410101 Invalid SCSI device type in PUB.
■ Last Failure Parameter [0] contains the PUB SCSI device type.
Table 5–3 Last Failure Codes (Continued)
Code Description