Technical data

5–75
Compaq HSZ80 Array Controller ACS Version 8.3 Maintenance and Service Guide
035B0100 Insufficient DWD resources available for SCSI message passthrough.
03640100 Processing run_switch disabled for LOGDISK associated with the other controller.
03650100 Processing pub unblock for LOGDISK associated with the other controller.
03660100 No memory available to allocate pub to tell the other controller of reset to one if its LUNs
03670100 No memory available to allocate pub to tell the other controller of a BDR to one if its LUNs
036F0101 Either send_sdtr or send_wdtr flag set in a non-miscellaneous DWD. Last Failure Parameter [0]
contains the invalid command class type.
03780181 In ds_get_resume_addr, the buffer address is non-longword aligned for FX access. Last
Failure Parameter [0] contains the re-entry dbd address value.
03820100 Failed request for mapping table memory allocation.
03830100 Failed request pci 875 block memory allocation.
03850101 ds_alloc_mem called with invalid memory type Last Failure Parameter [0] contains the invalid
memory type.
03860100 ds_alloc_mem was unable to get requested memory allocated: NULL pointer returned.
038C0100 Insufficient memory available for completion dwd array allocation.
03980100 Failed to allocate expandable EMU static work structures.
03990100 Failed to allocate expandable EMU work entry.
039A0100 Failed to allocate expandable EMU FOC work entry.
039B0100 EMU request work queue corrupted.
039C0100 EMU response work queue corrupted.
039D0100 EMU work queue corrupted.
039E0100 EMU foc request work queue corrupted.
039F0100 EMU foc response work queue corrupted.
Table 5–3 Last Failure Codes (Continued)
Code Description