Technical data

5–77
Compaq HSZ80 Array Controller ACS Version 8.3 Maintenance and Service Guide
04020102 The requester’s error table index passed to FM$REPORT_EVENT is larger than the maximum
allowed for this requester.
■ Last Failure Parameter[0] contains the instance code value.
■ Last Failure Parameter[1] contains the requester error table index value.
04030102 The USB index supplied in the Event Information Packet (EIP) is larger than the maximum
number of USBs.
■ Last Failure Parameter[0] contains the instance code value.
■ Last Failure Parameter[1] contains the USB index value.
04040103 The event log format found in V_fm_template_table is not supported by the Fault Manager. The
bad format was discovered while trying to fill in a supplied Event Information Packet (EIP).
■ Last Failure Parameter[0] contains the instance code value.
■ Last Failure Parameter[1] contains the format code value.
■ Last Failure Parameter[2] contains the requester error table index value.
04050100 The Fault Manager could not allocate memory for its Event Information Packet (EIP) buffers.
040A0100 The caller of FM$CANCEL_SCSI_DE_NOTIFICATION passed an address of a deferred error
notification routine which doesn’t match the address of any routines for which deferred error
notification is enabled.
040E0100 FM$ENABLE_DE_NOTIFICATION was called to enable deferred error notification but the
specified routine was already enabled to receive deferred error notification.
040F0102 The Event Information Packet (EIP)->generic.mscp1.flgs field of the EIP passed to
FM$REPORT_EVENT contains an invalid flag.
■ Last Failure Parameter[0] contains the instance code value.
■ Last Failure Parameter[1] contains the value supplied in the Event Information Packet
(EIP)->generic.mscp1.flgs field.
04100101 Unexpected template type found during fmu_display_errlog processing.
■ Last Failure Parameter[0] contains the unexpected template value.
Table 5–3 Last Failure Codes (Continued)
Code Description