Technical data

5–78 Event Reporting: Templates and Codes
04110101 Unexpected instance code found during fmu_memerr_report processing.
■ Last Failure Parameter[0] contains the unexpected instance code value.
04120101 CLIB$SDD_FAO call failed.
■ Last Failure Parameter[0] contains the failure status code value.
04140103 The template value found in the eip is not supported by the Fault Manager. The bad template
value was discovered while trying to build an esd.
■ Last Failure Parameter [0] contains the instance code value.
■ Last Failure Parameter [1] contains the template code value.
■ Last Failure Parameter [2] contains the requester error table index value.
05010100 In recursive_nonconflict could not get enough memory for scanning the keyword tables for
configuration name conflicts.
06010100 The DUART was unable to allocate enough memory to establish a connection to the CLI.
06020100 A port other than terminal port A was referred to by a set terminal characteristics command.
This is illegal.
06030100 A DUP question or default question message type was passed to the DUART driver, but the
pointer to the input area to receive the response to the question was NULL.
06040100 Attempted to detach unattached maintenance terminal.
06050100 Attempted output to unattached maintenance terminal.
06060100 Attempted input from output only maintenance terminal service.
06070100 The DUART was unable to allocate enough memory for its input buffers
06080000 Controller was forced to restart due to entry of a CNTRL-K character on the maintenance
terminal.
07010100 All available slots in the FOC notify table are filled.
07020100 FOC$CANCEL_NOTIFY() was called to disable notification for a rtn that did not have notification
enabled.
Table 5–3 Last Failure Codes (Continued)
Code Description